My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 851-860 of 2369

Set Descending Direction
per page
  1. AMT Pumps

    Diesel Engine Dredge Pump

    316F-Z5

    $8,662.56

    Diesel Dredge Pump with Hatz 1B20 diesel engine. Replaces 316F-D5

    AMT Engine Driven Dredging Pump is designed for pumping sea water and fresh water containing up to 25% sand, debris and other abrasive particles. This unit can be used for other ma...

    Diesel Learn More
  2. Riverside

    FP25V fire pump 2 1_2 inch

    L1293Y

    $2,699.00
    High Pressure Centrifugal Pump. Sometimes called Fire Pumps, these models are used to transfer water long distances or to deliver water at high pressure. Among their many uses are firefighting brush fires, rescue work, jetting in piles, washing...
    13HP Vanguard Learn More
  3. Myers Pumps

    2 Stage 2C150

    2C150

    $3,630.00
    Myers 2-Stage Centrifugal Pumps deliver high performance with a rugged design for years of trouble-free service. The 2-stage pumps are available as a completely assembled pump and motor or pump end. The fully assembled pump end quickly mounts t...
    1-1/2HP Learn More
  4. Wayne

    1-1/2 HP Lawn Sprinkling Pump

    WLS150

    $1,211.28

    Sprinkler pump designed to operate underground sprinkling systems, draw water from well, lake or ponds for lawn watering, pool filling or any other applications where high water volume is needed. 4860gph. All motors are wired 230V. The 3/4, 1 and ...

    120/230v Learn More
  5. AMT Pumps

    3" Self-Prime Pump

    2876-95

    $2,649.88

    AMT 7-1/2HP self-priming pump.

    Designed for a broad range of high capacity solids handling semi-trash applications. The Centerline discharge is specifically designed to prevent vapor binding and makes for more convenient piping connections. Heavy...

    7.5HP 230/460v Learn More
  6. Oberdorfer Pumps

    Bronze SP pump 1/3 hp

    300B-F13

    $1,972.23
    Bronze self priming pump with 1/3 hp motor. Mounts to a NEMA 56J motor with a threaded shaft SS. Self priming / suction lift to 20 feet. (15 ft without a foot or check valve)

    Bronze models - Ideal for marine service ( air conditioning, bilge, and...

    115v Learn More
  7. AMT Pumps

    Stainless Steel self priming Centrifugal

    2763-98

    $2,327.94
    Stainless Steel self priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable ...
    230/460v 2HP ODP Learn More
  8. MP Pumps

    2CT-3 Trash Pump Hydraulic

    36594

    $5,362.50
    Trash Pump Hydraulic. 2CT Jaeger Trash Pumps, self-priming, cast iron.

    The Model 2CT-3 is a 3" x 3" Self Priming Trash Pump which is close coupled to a high speed hydraulic motor Gerotor. This unit has cast iron construction with a ductile iro...

    3" Hydraulic Ped. Learn More
  9. Oberdorfer Pumps

    Bronze Flex Impeller Pump, marine cooling

    N202M-03

    $416.00
    Bronze self priming pump. Raw water pump Oberdorfer N202M. To replace the Sherwood CatalinaRaw water pumps Catalina 36/375 International. Half Cam/2 bolt Flange/5/8" shaft. These Rubber Impeller pumps are made of high quality bronze of maximum ...
    Drop in replacement for Sherwood Learn More
  10. AMT Pumps

    Cast Iron Centrifugal Pump

    4904-95

    $969.00

    High Pressure Centrifugal Pump Series Page Link. The straight centrifugal pump is designed for continuous duty high pressure OEM, industrial / commercial and general service applications including circulation, chemical processing, liquid transfer,...

    2HP 115/230 ODP - OBSOLETE, call or email for alternative assistance. Parts still available. Learn More
View as List Grid

Items 851-860 of 2369

Set Descending Direction
per page