My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1701-1710 of 2369

Set Descending Direction
per page
  1. Munro Pumps

    CI self prime pump 7.5hp

    MU75MT

    $10,879.00

    Self-priming high-head & high flow pump. Used for water irrigation and transfer. Three phase, 7.5 hp, 230/460vac,

    Heavy duty work horse. Sturdy cast iron design engineered for years of trouble free irrigation service. 13.4 amp @ 460v

    Three phase, 7.5 hp, Learn More
  2. Webtrol

    35GPM Cast Iron Booster Pump

    G35B12-3PH

    $1,937.00
    Booster pumps increase water pressure from city mains or private water systems. Especially important for proper operations of water softeners and filtration equipment. Units pump water from cisterns, tanks, or ponds, with suction lifts up to 10...
    2HP 230/460V ODP Learn More
  3. Hypro Pumps

    316SS pump 2HP

    COMSV663T

    $1,536.00

    316 SS 2hp centrifugal pump. Three phase electric motor for commercial use.

    This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof and TEFC motors...

    2HP 230/460v TEFC Learn More
  4. Webtrol

    35GPM Cast Iron Booster Pump

    G35B6-3PH

    $1,400.50
    Booster pumps increase water pressure from city mains or private water systems. Especially important for proper operations of water softeners and filtration equipment. Units pump water from cisterns, tanks, or ponds, with suction lifts up to 10...
    1HP 230/460V ODP Learn More
  5. Gorman-Rupp Pumps

    3" Honda Trash Pump

    3S5XHR

    $1,993.25

    Honda 3" Trash pump, gas powered by Honda GX200 engine.

    3" Alum.trash pump with cast iron impeller and wearplate. 3 qt fuel tank provides 100 min. continuous running. Includes metal roll frame. Made in USA, no trash from China. Be aware of other ...

    5HP Honda Gas Powered GX160 Learn More
  6. Gorman-Rupp Pumps

    Trash Pump 3" gas powered

    3S5XLR

    $1,255.88

    3" Gas Trash pump, AMT gas powered by LCT 208cc engine. 3" Alum. solids handling pump with cast iron impeller and wearplate. 3 qt fuel tank provides 100 min. continuous running.

    Ideally suited for a variety of industrial applications including: s...

    LCT Gas Learn More
  7. Hypro Pumps

    316SS pump 3HP

    COMSV673T

    $1,627.20

    3hp 316SS centrifugal pump with electric motor for industrial fluid and chemical transfer. 

    This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof...

    3HP 230/460v TEFC Learn More
  8. PumpBiz

    35GPM Cast Iron Booster Pump

    E35B16-3PH

    $1,823.00
    PumpBiz booster pumps increase water pressure from city mains or private water systems. Especially important for proper operations of water softeners and filtration equipment. Units pump water from cisterns, tanks, or ponds, with suction lift...
  9. Hypro Pumps

    316SS pump 3HP

    COMSV773T

    $1,313.93

    Obsolete End-suction centrifugal pump 316 SS. The Stainless Steel is investment cast for durability, no welds. Industrial pump for chemicals, soaps, solvents being transferred.

    FEATURES:

    Open (semi) impellers Passivated and electropolished

    Drai...

    230/460v 3HP TEFC OBSOLETE Learn More
  10. Tsurumi

    Gas powered Dewatering Semi-trash pump

    TE3-50HA

    $719.00
    Gas powered Dewatering Centrifugal pump. Heavy-duty Honda gas engine powered with oil sensor and Silicon Carbide mechanical seal provides the longest life in this class dewatering pump. 8220 GPH.

    Durable Rolled-Steel frame provides pump / engine ...

    4HP Honda 2" Learn More
View as List Grid

Items 1701-1710 of 2369

Set Descending Direction
per page