My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1671-1680 of 2369

Set Descending Direction
per page
  1. AMT Pumps

    Dewatering Pedestal Pump

    3826-99

    $576.94
    AMT Self-Priming Solids Handling Pedestal pumps are designed for direct or belt drive. Specific units are available in Cast Aluminum, Cast Iron or Thermoplastic construction material. Easy cleanout design by removing casing bolts, permits remov...
    AMT Self-Priming Solids Handling Pedestal pumps are designed for direct or belt drive. Specific units are available in Cast Aluminum, Cast Iron or Thermoplastic construction material. Learn More
  2. Hypro Pumps

    316SS pump .75HP

    COMSV233T

    $2,222.52

    316 SS investment cast end-suction centrifugal pump 3/4HP.  

    This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof and TEFC motors available as a...

    3/4HP 230/460v TEFC Learn More
  3. EBARA Pumps

    Ebara Pump 3 HP NSF

    A3U-32-12530D1G

    $3,215.40

    Ebara Pump. The EBARA Stainless Steel 3U Series Centrifugal Pumps are NSF certified, designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps potable water pumps are guaranteed tough,...

    3HP 230V ODP Learn More
  4. Hypro Pumps

    316SS pump .75HP

    COMSV23T

    $2,218.36

    3/4hp 316 SS investment cast end-suction centrifugal pump.

    FEATURES: Open (semi) impellers Passivated and electropolished 

    Drain plug 

    This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and...

    3/4HP 230/460v TEFC Learn More
  5. EBARA Pumps

    Ebara Pump 3 HP

    A3U-32-12530D3C

    $2,617.00

    EBARA A3U-32-12530D3C – Stainless Steel 3U Series Centrifugal Pump
    Tough. Efficient. Built for Demanding Environments.

    The EBARA 3U Series centrifugal pump is engineered for superior performance and long-term reliability—even under the harshes...

    3HP 208-230/460V ODP Learn More
  6. Hypro COMSV33 316SS pump 3/4HP
    Sale

    Hypro Pumps

    316SS pump 3/4HP

    COMSV33

    57% Off Special Price $952.00 Regular Price $2,232.00

    316 Stainless Steel 3/4HP end-suction centrifugal pump. Used in commercial applications from chillers to commercial cleaning machines and chemical transfer.

    FEATURES: Open (semi) impellers Passivated and electropolished 

    Drain plug

    This series ...

    115/230v/1 ODP 3/4HP Learn More
  7. Hypro Pumps

    316SS pump 1.5HP

    COMSV453T

    $2,278.87

    1.5HP three phase electric 316 SScast end-suction centrifugal pump. 

    This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof and TEFC motors availa...

    1.5HP 230/460v TEFC Learn More
  8. Sta-Rite

    Sta-rite Centrifugal Pump High Pressure

    JBHC-61S

    $1,723.00
    Sta-rite Centrifugal Pump High Pressure has a heavy-duty cast iron construction with silicon bronze impeller.
    • Applications: Water systems and sprinkling for homes, farms and industry
    • Drain Port: Provided for easy winterizing
    • Easy Serviceabi...
  9. AMT Pumps

    2" Solid Handling Pump Semi-trash

    3162-95

    $1,062.50
    The AMT Industrial Duty solids-handling pumps offer an upgraded debris handling capability up to 3/4" solids. Cast Iron w/ Iron Wear parts, silicon carbide seal. Applications include high-volume liquid transfer, irrigation, commercial draining ...
    Briggs 5.5HP - OBSOLETE, call or email for alternative assistance. Parts still available. Learn More
  10. AMT Pumps

    2" Trash Pump PTO

    2S5XP IPT

    $823.44

    Pedestal Trash pump,2"

    for gas, PTO, motor powered by customer supplied 5HP min required. 2" Aluminum trash pump. Includes suction strainer. IPT self-priming trash pumps are used for de-watering construction sites, pond management, utility vaults...

    Pedestal Mounted Trash pump Learn More
View as List Grid

Items 1671-1680 of 2369

Set Descending Direction
per page