Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Myers Pumps
Self prime CI pump 1.5 hp
QP15-3
$1,648.00Quick Prime self-priming pumps are designed to supply large quantities of water for long periods. QPs are ideal for lawn sprinkler systems, car washes and other high volume cleaning and maintenance applications.
- Rugged Cast Iron Case and Motor ...
230/460v 1-1/2HP Learn More -
Oberdorfer Pumps
Bronze Close Coupled Centrifugal Pump
172B-08A81
$754.00Close coupled Bronze Centrifugal with motor.- Bronze Casting is resistant to sea water
- Stainless Steel Shaft for Marine Use
- Motor is totally enclosed with 9” long vinyl plastic insulated leads
- Compact
- Lightweight
- Ideal for:
- Marine Air Conditioni...
-
Hypro Pumps
Turbine pump
TXMBB13T
$2,240.57Features • Direct Drive • Max. flow: 100 gpm • Max. pressure: 100 psi (Shut off) • Max. speed: 1000 rpm • Shaft: 15/16" stainless steel with 1/4" keyway • Port sizes: 1-1/2" NPT inlet, 1-1/2" NPT outlet • Max. fluid temperature: 140ºF • Housing: ...
-
MP Pumps
FM5 Flomax Pump w/ 3HP
22872
$4,312.50Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Long-Coupled Cast Iron Electric Motor-3 HP. Seawater Sampling -
Myers Pumps
Self prime CI pump 1.5 hp
QP15B-3
$1,838.00Quick Prime self-priming pumps are designed to supply large quantities of water for long periods. QPs are ideal for lawn sprinkler systems, car washes and other high volume cleaning and maintenance applications.- Rugged Cast Iron Case and Mot...
1-1/2HP 230/460v Learn More -
Oberdorfer Pumps
Bronze Close Coupled Centrifugal Pump
172B-08A82
$804.70Close coupled Bronze Centrifugal with motor.- Bronze Casting is resistant to sea water
- Stainless Steel Shaft for Marine Use
- Motor is totally enclosed with 9” long vinyl plastic insulated leads
- Compact
- Lightweight
- Ideal for:
- Marine Air Conditioni...
-
-
Gorman-Rupp Pumps
Fire Pump Gas Engine High Pressure Gas Fire Pump
2P5XA fire
$1,114.56Gas Engine High Pressure Pump 2". IPT Die-cast Aluminum, Self-Priming Engine Driven water Pump. AMT Div. of Gorman-Rupp High pressure pump, irrigation. Provides home fire pump fire protection with optional hose kit. No roll cage. Includes suction ...
7800GPH Briggs No roll cage 2" Learn More -
Oberdorfer Pumps
Bronze Close Coupled Centrifugal Pump
172B-A81
$715.00Close coupled Bronze Centrifugal with motor.- Bronze Casting is resistant to sea water
- Stainless Steel Shaft for Marine Use
- Motor is totally enclosed with 9” long vinyl plastic insulated leads
- Compact
- Lightweight
- Ideal for:
- Marine Air Conditioni...
-
Myers Pumps
Self prime CI pump 1hp
QP10B-3
$1,493.00Quick Prime self-priming pumps are designed to supply large quantities of water for long periods. QPs are ideal for lawn sprinkler systems, car washes and other high volume cleaning and maintenance applications.- Rugged Cast Iron Case and Mot...
1 HP 230/460v Learn More
