My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1021-1030 of 2369

Set Descending Direction
per page
  1. AMT Pumps

    6" Diesel Trash Pump Trailer Mount

    5587-D6

    23% Off Special Price $29,861.56 Regular Price $38,781.25

    6" Diesel Trash Pump is designed for applications requiring high volume flow and solid debris handling capabilities. Diesel engine Kohler KDW1003. Pump is constructed of heavy duty sand cast aluminum with cast iron and stainless steel internal par...

    23HP Learn More
  2. AMT Pumps

    High Pressure Cast Iron Centrifugal Pump

    489B-95

    $886.13
    High Pressure / High Head Centrifugal Pumps. OBS see alternates. Parts are available. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office...
    230/460v 1-1/2HP TEFC - OBSOLETE, call or email for alternative assistance. Parts still available. Learn More
  3. AMT Pumps

    4" Diesel Engine Trash Pump

    3993-Z6

    23% Off Special Price $9,227.63 Regular Price $11,983.94
    Diesel Engine Powered Trash Pump. Discharge can rotate in 90 degree increments. Engine Driven Trash pumps are designed for applications which require high flow efficiency and solid handling capability. These pumps are constructed of heavy duty ...
    Hatz Diesel Engine 11HP Learn More
  4. MP Pumps

    FM40 Pedestal Pump

    33684

    $10,262.50
    Flomax 40 are self-priming pumps, pipe size 4" NPT. Pedestal pump with FKM seal, grease lube bearings, 1 1/8" shaft. For Belt of direct drive. Often used for ship ballast, marine, fuel depots. See performance curve under IMAGE tab for speed vs ...
    4" cast iron Learn More
  5. Pacer Pumps

    SE2RB 1B20 Diesel

    58-12R2 1B20

    $4,186.00

    Diesel Pacer water pump.

    2" Centrifugal Pump. (Self-Priming) Pacer series with diesel engine. Great pump for removing water from basements, ditches, swimming pools or anywhere a large volume of water needs to be removed. Also good for irrigation,...

    2", 5HP Hatz Diesel Learn More
  6. Sta-Rite

    High Pressure Booster Pump

    HP10E3-02

    $2,420.00 $2,420.00 Click for price
    This Booster Pump is the most durable booster pump available. The patented SignaSeal™ floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic componen...
    230/460v 1hp Learn More
  7. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-5M

    $9,320.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  8. MP Pumps

    Hydraulic driven centrifugal pump

    27010

    $7,237.50
    Hydraulic driven centrifugal pump. End Suction Centrifugal Pump, close coupled to a hydraulically 1.59 driven motor. Pump has standard SAE two bolt "B" flange and 13 tooth internal spline shaft and is mounted to a Ultra hydraulic motor 2TR026. Of...
  9. Gorman-Rupp Pumps

    Bronze Circulator Pump

    5746-97

    20% Off Special Price $1,280.00 Regular Price $1,600.00

    Patterson Inline Circulator Pumps are designed for continuous duty industrial/ commercial systems. Pumps are available in a variety of material configurations to meet your specifications. The line is powered by a single phase or 3 phase electri...

    Patterson Inline Circulator Pumps are designed for continuous duty industrial/ commercial systems. Pumps are available in a variety of material configurations to meet your specifications. Learn More
  10. AMT Pumps

    Electric Trash Sewage pump 3HP

    316A-95

    $1,770.13

    3HP Electric motor Trash pumps are designed for a trouble free and economical handling of solid-laden liquids and slurries. Cast iron construction with 2 vane Stainless steel self-cleaning impellers, Silicon Carbide mechanical seals for abrasion r...

    208/230/460v 3P 6 600 GPH Learn More
View as List Grid

Items 1021-1030 of 2369

Set Descending Direction
per page