Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
Stainless Steel Centrifugal Pump 3 phase
489B-98
$1,390.00Stainless Steel High Head Centrifugal Pumps. OBS see alternates. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation...
230/460v 1-1/2HP TEFC Learn More -
AMT Pumps
High Pressure Bronze Centrifugal Pump
489F-97
$1,357.20High Head Centrifugal Pump. Designed for continuous duty, high pressure, high flow, general service water circulation and transfer (boosting water in high rise apartments, hotels & office buildings, circulation of hot & chilled water, pressure ...208-230/460v 1HP ODP Learn More -
American Stainless
SS pump & motor
C14622B2T3
$828.41Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...2HP 208-230/460V TEFC Learn More -
Serfilco
H2X1.5KE1V(M8)-D1.5
42-0318A
$3,389.39PVDF/KYNAR Centrifugal Horizontal Mechanical Sealed Pump 1.5 Hp Series “HE” Horizontal Pumps feature “total” chemical resistance with non-metalic construction of all wetted components. The molded, enclosed impellers are designed to provide maximu...1 1/2HP 208-230/460V TEFC Learn More -
Webtrol
Corrosion Resistant Pump
PC50R-3PH-T
$2,349.74Corrosion resistant Centrifugal Pump.- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
1/2HP 208-230/460V TEFC Learn More -
Webtrol
Corrosion Resistant Pump
PC75R-3PH-T
$2,469.39- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
3/4HP 208-230/460V TEFC Learn More -
Webtrol
Corrosion Resistant Pump
PC100R-3PH-T
$2,735.73- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel impeller insert & wear ring
1HP 208-230/460V TEFC Learn More -
Webtrol
Corrosion Resistant Pump
PC150R-3PH-T
$2,943.39- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
1 1/2HP 208-230/460V TEFC Learn More -
MTH Pumps
Turbine Pump 3/4HP
T41BSS753TV
$3,524.71Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well a... -
MP Pumps
HTO 120 Pump
29892
$4,140.00Centrifugal Hot Oil Pump Features:
- Applications: Asphalt plants, Plastics, Chemical, Food, and Processing Industries which require pumping of high temperature fluids. The HTO is used to move a heat transfer fluid on a double walled piping syste...
5.5" Impeller 5HP 3-Phase Learn More