Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
FM30 Pump w/ no engine
33212
$3,470.00Flomax 30 are self-priming pumps, pipe size 3" NPT. Pump End Only single seal for mounting to Gasoline engine with a 1" diameter shaft. Engine supplied separately.6.75" impeller Learn More -
MP Pumps
FM30 Pump w/ 18HP Engine
39143
$8,280.00Flomax 30 are self-priming pumps, pipe size 3" NPT. FM30 Pump with single seal and 18HP Briggs & Stratton engine. Use for irrigation, dewatering, tank filling, bilge, HDD, pilings and other large water transfer or construction applications. Pump i...
-
MP Pumps
FM 15 w/ motor
22728
$4,080.00Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP
Anyone who has ever owned or maintained a pool will tell you that every pool needs a good filter system to keep it ...
7.5HP 230/460v TEFC Learn More -
MP Pumps
FM 15 w/ motor
26557
$3,850.00Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Driven Pump using Close-Coupled Cast Iron Electric Motor-7.5 HP7.5HP, 3ph Learn More -
MP Pumps
FM 15 w/ motor
22784
$4,930.00Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Driven Pump using Long-Coupled Cast Iron Electric Motor-10 HP.Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-o...Cast Iron 10Hp, 3phase Learn More -
MP Pumps
HTO 300 Pump w/ motor
33786
$7,340.00Centrifugal Hot Oil Pump Features:
- Applications: Plastics, Chemical, Food oils, and Processing Industries which require pumping of high temperature fluids
- Utilizes an isolated seal chamber, effectively cooled by a fan clamp, which couples th...
10HP 5.7" Imp Learn More -
AMT Pumps
3" CI Self-Prime Pump
2877-95
23% Off Special Price $1,812.58 Regular Price $2,354.00AMT / Gorman Rupp self-priming solids handling pumps are designed for a broad range of high capacity applications. Semi-trash pump made for demanding industrial applications, job site dewatering or pond transfer. The Centerline discharge is speci...3HP 230v/1 water pump Learn More -
Griswold Pumps
CI SP pump 7.5HP
75HLS TEFC
$8,230.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.7-1/2HP 230/1 Learn More -
Griswold Pumps
CI SP pump 7.5HP
75HLT ODP
$7,759.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.7-1/2HP 230/460v/3 Learn More -
Griswold Pumps
CI SP pump 7.5HP
75HLT TEFC
$7,759.00Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.7-1/2HP 230/460v Learn More