Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
B1-1/2ZPL (10HP - Three Phase - CI)
B53752
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All centrifugal pumps offer back pull-out design
- Impeller size is trimmed
- Berkeley Pump discharge size: 1.5"
- Berkeley Pump suction size: 2"
10HP 230/460V ODP PACKING Learn More -
Myers Pumps
Frame Mtd. 2 Stage w/ motor
I2CB-10M
$9,220.00High Pressure centrifugal pumps
Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), ... -
Myers Pumps
Frame Mtd. 2 Stage w/ motor
I2CB-10MT
$10,660.00High pressure centrifugal Pump.
Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), ... -
Myers Pumps
Framed Mtd. 2 Stage w/ motor
I2CIB-10MT
$10,660.00Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...
-
Myers Pumps
Framed Mtd.2 Stage w/ motor
I2CIB-10M
$9,130.00Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy...
-
Berkeley Pumps
Centrifugal Water Pump
B58088
End suction centrifugal pump, close coupled with mechanical seal.10HP 230/460V ODP Learn More