Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MTH Pumps
Turbine Pump 3/4HP
T51BAI751TB
$1,758.09Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t... -
Sta-Rite
Conv Jet Pump 3/4HP
PLD PKG 1-4SD
The performance-proven PL Series is constructed to be lightweight and extremely resistant to sand and abrasive wear, it performs best on all deep well installations.Superior Rustproof Construction - Pump body is Dura-Glasï½® fiberglass reinforc...
-
Sta-Rite
Conv Jet Pump 3/4HP
PLD PKG 1-14AP
The performance-proven PL Series is constructed to be lightweight and extremely resistant to sand and abrasive wear, it performs best on all deep well installations.Superior Rustproof Construction - Pump body is Dura-Glasï½® fiberglass reinforc...
-
Oberdorfer Pumps
Bronze Close Coupled Centrifugal Pump
109MB-05M19
$922.00Close coupled Bronze Centrifugal with motor.- All Bronze
- Teflon Lip
- Marine Use
- Explosion Proof Motors Available
- Will Handle Contaminated Liquids
- Extremely Quiet
- A Standard in the Marine Air Conditioning Industry
- Counter-Clockwise Rotation
-
Sta-Rite
Conv Jet Pump 3/4HP
PLD PKG 1-10AP
The performance-proven PL Series is constructed to be lightweight and extremely resistant to sand and abrasive wear, it performs best on all deep well installations.Superior Rustproof Construction - Pump body is Dura-Glasï½® fiberglass reinforc...
-
Sta-Rite
Conv Jet Pump 3/4HP
PLD PKG 1-8AP
The performance-proven PL Series is constructed to be lightweight and extremely resistant to sand and abrasive wear, it performs best on all deep well installations.Superior Rustproof Construction - Pump body is Dura-Glasï½® fiberglass reinforc...
-
Sta-Rite
Conv Jet Pump 3/4HP
PLD PKG 1-11CP
The performance-proven PL Series is constructed to be lightweight and extremely resistant to sand and abrasive wear, it performs best on all deep well installations.Superior Rustproof Construction - Pump body is Dura-Glasï½® fiberglass reinforc...
-
Sta-Rite
Conv Jet Pump 3/4HP
PLD PKG 1-19CP
The performance-proven PL Series is constructed to be lightweight and extremely resistant to sand and abrasive wear, it performs best on all deep well installations.Superior Rustproof Construction - Pump body is Dura-Glasï½® fiberglass reinforc...
-
Sta-Rite
Conv Jet Pump 3/4HP
PLD PKG 1-22N
The performance-proven PL Series is constructed to be lightweight and extremely resistant to sand and abrasive wear, it performs best on all deep well installations.Superior Rustproof Construction - Pump body is Dura-Glasï½® fiberglass reinforc...
-
Sta-Rite
Conv Jet Pump 3/4HP
FLD PKG 1-55SD
Quality Construction - Close-grained cast iron pump body is rugged, one-piece unit, specially treated to resist corrosion. Drain port provided for easy winterizing Precision Molded Diffuser - Pump primes faster, handles more air, with multi-port,...