Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MTH Pumps
Turbine Pump 3/4HP
T41BSS751EV
$3,868.79Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well...Turbine Pump 3/4HP /1ph, Explosion proof Learn More -
MTH Pumps
Turbine Pump 3/4HP
T41BAB751EB
$1,947.81Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well a... -
MTH Pumps
Turbine Pump 3/4HP
T41BBF751EB
$1,661.11Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well a... -
March Pumps
Magnetic pump EXP PPS
TE-5C-MD RYTON EXP 1P
$1,653.68All Ryton PPS magnetic coupled pump. Ryton is a engineering thermoplastic and is good for many chemicals, solvents, alcohol and hot liquids. Motor is EXP 115/230 single phase. March pumps are used in industry, sanitizing with alcohol and special a...
Ryton Pump 115/230V Explosion Proof Learn More -
March Pumps
PVDF PUMP EXP
TE-5.5K-MD XP 1PH 1/3HP
$2,748.00PVDF Kynar magnetic sealless pump design w/closed impeller magnet assembly. Max. flow 30GPM. Head 41 ft. Temps. to 190F. 3.187 impeller. Explosion proof hazardous duty pump has Kynar plastic construction & can handle strong halogen solutions & ...115/230v EXP Kynar Learn More -
MTH Pumps
Turbine Pump 3/4HP
T41BAI751EB
$1,780.60Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well a... -
MTH Pumps
Turbine Pump 3/4HP EXP
T41EBF751EB EXP
$1,684.12Mechanically sealled regenerative turbine for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petroleum, as well as...