My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 61-70 of 103

Set Descending Direction
per page
  1. EBARA Pumps

    SS Pump 7.5 HP ODP

    A3U-50-125-75D1G

    $4,090.00
    The EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built ...
    7 1/2HP 230V ODP Learn More
  2. EBARA Pumps

    Stainless Pump 7.5 HP ODP

    A3U-50-125-75D3G

    $3,611.00

    EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for long...

    7 1/2HP 230V ODP Learn More
  3. EBARA Pumps

    SS Pump 7.5HP ODP

    A3U-32-20075D1G

    $3,791.17
    The EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built ...
    7 1/2HP 230V ODP Learn More
  4. Finish Thompson Pumps (FTI)

    AC6 Horizontal Centrifugal Pump

    AC6SJS1V520B011809

    $4,122.00

    Rugged, metallic sealed centrifugal AP Series pumps are compact in design, easy to operate and handle, and very economically priced.

    Built from high quality 316 stainless steel the AP Series pumps are available in both horizontal or vertical...

    7.5HP 3P Learn More
  5. Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC32VCV601804

    $9,962.94
    Finish Thompson Inc. Pump. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic ...

  6. Finish Thompson Pumps (FTI)

    Finish Thompson KC22 Pump

    KC22PCVNO601807

    $6,985.40
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag...

    7-1/2HP 230/460v Learn More
  7. Finish Thompson Pumps (FTI)

    Explosion Proof Magnetic Pump

    KC22PCVNO601812

    $7,817.71
    Explosion Proof FTI pump and motor. Hazardous duty sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over tra...

    7-1/2HP EXPlosion Proof 230/460v Learn More
  8. Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC22PCVNO602116

    $7,087.58
    Chem duty Finish Thompson Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic...

    7-1/2HP 230/460v ChemDuty Learn More
  9. Finish Thompson Pumps (FTI)

    Finish Thompson Magnetic Pump

    KC22PCVNO602118

    $6,583.66
    Finish Thompson Inc. Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag...

    7-1/2HP 230/460v Learn More
  10. Finish Thompson Pumps (FTI)

    FTI Kynar Magnetic Pump

    KC22VCVNO601807

    $9,217.76
    FTI Kynar Magdrive sealless pumps designed for chemical processing and the highest level of reliability.

    All series KC pumps from FTI feature Neodymium Rare-Earth magnets. The resultant superior benefits over traditional ceramic mag pumps incl...

    7-1/2HP 230/460v Kynar PVDF Learn More
View as List Grid

Items 61-70 of 103

Set Descending Direction
per page