My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 13

Set Descending Direction
per page
Page
  1. Sta-Rite

    JB Centrifugal Pump Med Head 1/2HP

    JBMC3-56S

    $1,696.00 $1,696.00 Click for price
    This pump has a heavy-duty cast iron construction with silicon bronze impeller.
    • Applications: Water systems and sprinkling for homes, farms and industry
    • Drain Port: Provided for easy winterizing
    • Easy Serviceability: Includes replaceable wear rin...
  2. Webtrol

    Corrosion Resistant Pump

    PC50R-3PH

    $2,175.95
    • Glass Reinforced Noryl
    • Close coupled
    • Ability to rotate the discharge in 90 degree increments.
    • 316 stainless steel
    1/2HP 208-230/460V ODP Learn More
  3. Webtrol

    Corrosion Resistant Pump TEFC motor

    PC33R-3PHT

    $2,589.00
    • Close coupled
    • 316 Stainless steel
    • Glass Reinforced Noryl
    • Ability to rotate the discharge in 90 degree increments.
    1/2HP 208-230/460V ODP Learn More
  4. Myers Pumps

    High Pressure Centrifugal Pump

    CT053

    $800.00
    Myers CT Series of centrifugal pumps are designed to meet your toughest pumping requirements. Rugged cast iron construction can be coupled with either a corrosion resistant composite, or a lead-free brass impeller. Versatile design features all...
    1/2HP 230v/460v Learn More
  5. Myers Pumps

    High Pressure Centrifugal Pump

    CT05B3

    $1,300.00
    The Myers CT Series of centrifugal pumps are designed to meet your toughest pumping requirements. Rugged cast iron construction can be coupled with either a corrosion resistant composite, or a lead-free brass impeller. Versatile design features...
    1/2hp 230/460v Learn More
  6. Sta-Rite

    JB Centrifugal Pump High Head 1/2HP

    JBHC3-61S

    $1,625.00 $1,625.00 Click for price
    This pump has a heavy-duty cast iron construction with silicon bronze impeller.
    • Applications: Water systems and sprinkling for homes, farms and industry
    • Drain Port: Provided for easy winterizing
    • Easy Serviceability: Includes replaceable wear rin...
  7. Hypro Pumps

    316SS pump .5HP

    COMSV123T

    $1,259.04

    316 SS investment cast end-suction centrifugal pump by Hypro Shertech. This series of low pressure general transfer pumps are also available in Cast Iron and Bronze with single and three phase electric motors. Explosion Proof and TEFC motors avail...

    230/460v TEFC 1/2HP Learn More
  8. Hypro Pumps

    Corrosion Resistant PolyPro Pump

    CHMPB123T

    $842.45
    Corrosion Resistant Polypropylene Centrifugal pumps. Close coupled to a NEMA 56J electric motor. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical transfer, pools, spas, solvent r...
    230/460v 1/2HP Learn More
  9. Hypro Pumps

    Corrosion Resistant PolyPro Pump

    CHMPB123

    $836.66
    Corrosion Resistant Polypropylene Centrifugal pumps. Close coupled to a NEMA 56J electric motor. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical transfer, pools, spas, solvent r...
    230/460v 1/2HP ODP Learn More
  10. MP Pumps

    HTO 80 Pump w/ motor

    29711

    $3,230.00

    HTO80 is a patented, unique centrifugal pump designed for high temperature liquid applications. Thermal heat transfer pumps.

    Centrifugal Hot Oil Pump Tempuflo Features:

    • Applications: Plastics, Chemical, Food, and Processing Industries which re...
    1/2HP 230/460v ODP Learn More
View as List Grid

Items 1-10 of 13

Set Descending Direction
per page
Page