Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
American Stainless
SS pump & motor
C14616BEX3
$1,613.36304SS centrifugal pump. SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. ...1 1/2HP 230/460V EXP Learn More -
MP Pumps
Series 80 w/ motor
35637
$2,251.00MP Series 80 End Suction Centrifugal Pump. 1.25" NPT suction and 1" NPT horizontal/vertical discharge. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor - 3 HP, 3-phase, 230/460 V, 3450 RPM. The pumps are right hand rota...3HP 230/460v Exp Learn More -
American Stainless
SS end suction horizontal pump & motor
S24362E3X3F
$2,290.25Models SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps do not ...3HP 230/460V EXP Learn More -
MP Pumps
Flomax fuel pump
34387
$7,280.00Flomax 15 are self-priming pumps, pipe size 3" NPT. Electric Motor Driven Pump using Close-Coupled Cast Iron Explosion proof EXP hazardous duty Electric Motor 5 HP. Pump has FKM mechanical seal and BunaN gaskets, no flapper valve and a pump bas... -
AMT Pumps
Explosion Proof Self Priming Pump
282K-X5
$2,599.59Explosion Proof Self Priming Pump. This line of Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clo...
230/460v 1HP EXP Learn More -
American Stainless
Close coupled pump/mtr 2 HP 3ph
C15418B2X3
$1,388.56Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...2HP 230/460V EXP Learn More -
American Stainless
SS pump & motor Exp
C14616B1X3
$1,219.77Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps d...1HP 230/460V EXP Learn More -
American Stainless
Stainless Stee Pump Explosion Proof motor
C24358V3X3F
$1,759.67Stainless Stee Pump Explosion Proof motor. Pump has a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted ver...
3HP 230/460V EXP Learn More