Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
AMT Pumps
AMT Self Priming Centrifugal Pump
285G-95
20% Off Special Price $653.60 Regular Price $817.00285G-95 AMT IPT Self-priming centrifugal pump for circulating, liquid transfer and dewatering applications. Self-cleaning, clog resistant impeller. Built in flapper/check valve. Handle & steel case. Also available in 12v and Hazardous / EXP motors...
1HP 115/230v TEFC Learn More -
AMT Pumps
Self Priming Centrifugal Pump 1HP
285J-95
20% Off Special Price $692.80 Regular Price $866.001 HP Self-priming cast iron pump for clean or dirty water circulating, liquid transfer, coolant and dewatering applications. Self-cleaning, clog resistant impeller. Built in flapper/check valve. Handle & steel case. For a 12v model see -12 version...
1HP 230/460v/3 TEFC Learn More