My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-10 of 16

Set Descending Direction
per page
Page
  1. Barmesa - 62210004: IA1-7.5-2 High Head pump

    Barmesa Pumps

    IA1-7.5-2 High Head pump

    62210004
    $1,855.00

    High Head End-Suction Centrifugal Pump.

    Commercial duty pumps featuring tangent discharge and retrofit to other OEM pumps often used on chillers, cooling towers. High head means higher pressure at medium flow rates

    Applications

    • Booster system...
    7.5HP 230/460v ODP Learn More
    Add to Wish List Add to Compare
  2. 75HLT ODP CI SP pump 7.5HP

    Griswold Pumps

    CI SP pump 7.5HP

    75HLT ODP
    $7,759.00
    Heavy duty work horse. Sturdy cast iron design with bronze impeller engineered for years of trouble free irrigation service.
    7-1/2HP 230/460v/3 Learn More
    Add to Wish List Add to Compare
  3. Munro MU75HS Irrigation self prime pump 7.5hp

    Munro Pumps

    Irrigation self prime pump 7.5hp

    MU75HS
    $9,424.00

    Irrigation Self-priming high-head & high flow pump. Single phase, 7.5 hp, 230vac. Sprinkler irrigation pump. Also used for pond level management.

    Heavy duty work horse. Sturdy cast iron with bronze impeller design engineered for years of trouble ...

    230v/1 Learn More
    Add to Wish List Add to Compare
  4. Munro MU75HT CI self prime pump 7.5hp

    Munro Pumps

    CI self prime pump 7.5hp

    MU75HT
    $7,709.00

    Self-priming high-head & high flow pump. Great for irrigation and other high head water applications. Three phase, 7.5 hp, 230/460vac,

    Heavy duty work horse. Sturdy cast iron design engineered for years of trouble free irrigation service.

    Self-priming high-head & high flow pump. Three phase, 7.5 hp, Learn More
    Add to Wish List Add to Compare
  5. Munro MU75MS Sprinkler pump 7.5hp Medium Head

    Munro Pumps

    Sprinkler pump 7.5hp Medium Head

    MU75MS
    $9,424.00
    Sprinkler pump 7.5hp Medium Head. Self-priming high-head & high flow pump turf pumps. These pumps are used extensively by golf course, water parks, sod farms, and other constant duty applications. Single phase, 7.5 hp, 230vac,

    Heavy duty work ...

    230v/1 Learn More
    Add to Wish List Add to Compare
  6. Munro MU75MT CI self prime pump 7.5hp

    Munro Pumps

    CI self prime pump 7.5hp

    MU75MT
    $7,726.00

    Self-priming high-head & high flow pump. Used for water irrigation and transfer. Three phase, 7.5 hp, 230/460vac,

    Heavy duty work horse. Sturdy cast iron design engineered for years of trouble free irrigation service. 13.4 amp @ 460v

    Three phase, 7.5 hp, Learn More
    Add to Wish List Add to Compare
  7. ebara_3u-ss_5.jpg

    EBARA Pumps

    SS Pump 7.5 HP ODP

    A3U-40-16075D1G
    $3,631.45

    SS EBARA 304 Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions or simple potable water. These pumps are guaranteed tough, engineered for the ...

    7 1/2HP 230V ODP Learn More
    Add to Wish List Add to Compare
  8. SS Pump 7.5 HP ODP

    EBARA Pumps

    SS Pump 7.5 HP ODP

    A3U-50-125-75D1G
    $4,090.00
    The EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built ...
    7 1/2HP 230V ODP Learn More
    Add to Wish List Add to Compare
  9. Stainless Pump 7.5 HP ODP

    EBARA Pumps

    Stainless Pump 7.5 HP ODP

    A3U-50-125-75D3G
    $3,611.00

    EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built for long...

    7 1/2HP 230V ODP Learn More
    Add to Wish List Add to Compare
  10. ebara stainless steel A3U centrifugal pump

    EBARA Pumps

    SS Pump 7.5HP ODP

    A3U-32-20075D1G
    $3,791.17
    The EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. These pumps are guaranteed tough, engineered for the professional and built ...
    7 1/2HP 230V ODP Learn More
    Add to Wish List Add to Compare
View as List Grid

Items 1-10 of 16

Set Descending Direction
per page
Page
Compare Products
  1. Remove This Item
Compare
Clear All
Shop By
Now Shopping by
  1. Category Center Line Discharge Remove This Item
  2. Horse Power (HP) 7 1/2 Remove This Item
  3. Motor ODP Remove This Item
Clear All
Shopping Options
Phase (Ø)
  1. Single (1) 8 items
  2. Three (3) 8 items
Voltage (Range)
  1. 220-240/460-480 5 items
  2. 220-240 11 items
inlet size
  1. 2" 3 items
  2. 2 ½" 7 items
  3. 3" 3 items
  4. 4" 2 items
PRICE $
$  -  $