Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
American Stainless
Stainless Centrifugal Pump
C25438B5T3F
$2,099.61304 Stainless Steel high efficiency pump. SSPC2 assembly with a 5.4" x 0.380" imp, T16 M.Seal.5HP 230/460V TEFC Learn More -
Berkeley Pumps
B4ZPKS Centrifugal Self-Priming Pump
B54636
Berkeley Type B, Self Priming pumps are built for continuous dependable performance and ease of repair. High lift designs allow suction lifts up to 25 feet at sea level. Ideal for transfer applications, standby fire protection, dewatering and i...
10HP 230/460v Learn More -
Berkeley Pumps
B8GPBM Centrifugal Pump
B51798
The type B, pumps are built for continuous dependable performance and ease of repair. Ideal for transfer applications, standby fire protection, dewatering and irrigation. Flows to 3000 GPM, Heads to 60 feet.
-
Flows to 3000 GPM, Heads to 60 ...25HP 230/460v Learn More
Berkeley Pumps
B1-1/2ZPH (15HP - Three Phase - CI)
B53759
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- Impeller size is 9"
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v packed Learn More
Pedrollo Pumps
Centrifugal End Suction pump
CP20H36S
$781.77Pedrollo centrifugal pump for clean water . They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN THE DOMEST...2HP 230/460v/3 Learn More
MP Pumps
High Head Pump & Motor HHLF
36301
$3,570.00Self priming high head centrifugal pump, close coupled to an electric motor.
- 1 1/2 x 1 1/2" HIGH HEAD
- ABS Type approved for shipboard services. 46 CFR Compliant Auxiliary Fire Control. HHL-FLOMAX “HR” high pressure self-priming pumps meet USCG...
7.5HP 230/460v USCG Learn More
Berkeley Pumps
B3ZPMS Centrifugal Water Pump
B54118
End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.15HP 230/460v/3 ODP Learn More
Berkeley Pumps
B3ZPLS Centrifugal Water Pump
B70224
End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.25HP 230/460v/3 ODP Learn More
Pedrollo Pumps
Liquid Turbine pump
PQ05H36S
$416.12Liquid Turbine pump. Peripheral pump with cast iron body.They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. FOR THEIR RELIABILITY...
1/2HP 230v/460 Learn More
Berkeley Pumps
B1-1/2ZPLS
B54504
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- American Made
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v Seal Learn More -
