My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 61-70 of 172

Set Descending Direction
per page
  1. Berkeley Pumps

    B3ZPLS Centrifugal Water Pump

    B70230

    $16,044.00
    End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.
    40HP 230/460v/3 ODP Learn More
  2. Berkeley Pumps

    B4ZPBH High Flow Irrigation Pump 20HP

    B85685

    $11,272.00

    The type B, High Flow/High Efficiency Centrifugal Irrigation pumps are built for continuous dependable performance and ease of repair. High lift designs allow suction lifts up to 25 feet at sea level. Ideal for transfer applications, standby fire ...

    20HP CW Packed Learn More
  3. MP Pumps

    High Pressure Water Pump w/10HP

    39876

    $4,290.00
    HHLF2 High Head pump, 10hp

    Self priming high head centrifugal pump, close coupled to 10HP Electric motor/3phase. Stand by fire pump. Meets or exceeds .

    • 2 x 2" HIGH HEAD
    • ABS type approved for many shipboard services USCG auxiliary fire pump...
    HHLF2 2" 10HP/3phase Learn More
  4. Berkeley Pumps

    B1-1/2TPMS High Pressure Water Pump

    B58084

    $5,558.00
    High Pressure, End suction centrifugal pump, close coupled 3-phase motor with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Berkeley water pumps are a industry leader for transfer, sprinkler, chiller, proces...
    5HP 230/460V ODP Learn More
  5. MP Pumps

    316SS Self prime pump FMX100

    39467

    $1,320.00

    The patented ; FMX100 self-priming centrifugal pump is constructed of 316 SS for superior corrosion resistance and compatibility with most fluid types. A carbon / ceramic / FKM mechanical seal is standard. With a maximum flow of over 55 GPM and pr...

    230v/460v 3/4HP TENV Learn More
  6. Berkeley Pumps

    B5WPS Water Pump

    B62580

    $9,052.17
    Berkeley Pump End suction centrifugal pump, close coupled with mechanical seal. Water pump for irrigation, water transfer, industrial applications. Silicon Bronze impeller. Obsolete due to DOE new efficiency standards.
    7.5HP 3ph OBS Learn More
  7. Hypro Pumps

    Bronze centrifugal Pump

    COMBB663T

    $1,776.31

    Shurflo Hypro Bronze pump for salt water and other liquids needing corrosion resistance. Commercial duty seawater centrifugal pump. 1.5hp electric motor. 

    This series of low pressure general transfer pumps are also available in 316SS and Cast Iro...

    2HP 230460v Bronze pump Learn More
  8. AMT Pumps

    Self Priming Cast Iron Pump

    2SP20C-3P

    $1,198.00

    2HP Self-priming Cast Iron pump

    for circulating liquid transfer and dewatering applications. This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer, waste water...

    2HP 3 phase Learn More
  9. MP Pumps

    Series 110 w/ motor

    26544

    $1,480.00
    Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-.75 HP, 3450 RPM.
  10. MP Pumps

    Series 110 w/ motor

    24580

    $1,450.00
    Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-2 HP, 3450 RPM.
View as List Grid

Items 61-70 of 172

Set Descending Direction
per page