Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Berkeley Pumps
Centrifugal Water Pump
B76764
$22,608.00End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation and other water transfer applications. B3EPBLS50HP 3600/60/3 460V FLGD Learn More -
Berkeley Pumps
B3ZPLS Centrifugal Water Pump
B70224
$14,202.00End suction centrifugal pump, close coupled with mechanical seal. Used for irrigation, fountains and other water transfer applications.25HP 230/460v/3 ODP Learn More -
Pedrollo Pumps
Liquid Turbine pump
PQ05H36S
$416.12Liquid Turbine pump. Peripheral pump with cast iron body.They are recommended for pumping clean water without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made. FOR THEIR RELIABILITY...
1/2HP 230v/460 Learn More -
Berkeley Pumps
B1-1/2ZPLS
B54504
$8,002.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- American Made
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
15HP 230/460v Seal Learn More -
Pedrollo Pumps
Centrifugal End Suction pump
CP07H36S
$524.27Pedrollo centrifugal pump for clean water . BOOSTER PUMP.They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY U...3/4HP 230/460v Learn More -
Pedrollo Pumps
Centrifugal End Suction pump
PNGA07H36S
$1,525.43Pedrollo centrifugal pump for clean water . They are recommended for pumping water and liquids that are chemicals but non aggressive to the materials from which the pump is made. RELIABLE AND MAINTENANCE FREE THEY ARE WIDELY USED IN THE DOMESTIC ...3/4HP 230/460v Learn More -
Berkeley Pumps
B1-1/2ZPLS
B08607
$9,996.00Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.- All pumps offer back pull-out design
- American Made
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suction size: 2"
20HP 230/460v Learn More -
Berkeley Pumps
B1-1/2EPLS
B54078S
$13,274.00B1-1/2EPLS B54078s Berkeley Pump 20hp
Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.
- All pumps offer back pull-out design
- American Made
- Berkeley Pump discharge size: 1-1/2"
- Berkeley Pump suctio...
20HP 230/460v Learn More -
MP Pumps
Series 200 pump
22737
$2,970.00Centrifugal pump, motor driven centrifugal pump. End suction centrifugal pump made from rugged cast iron with a cast impeller. Impellers are dynamically balanced to improve efficiency and bearing life.Discharge can be vertical or horizontal. ...5HP 230/460v Learn More -
MP Pumps
Series 200 pump
35804
$5,634.20Bronze Centrifugal pump, motor driven centrifugal pump. End suction centrifugal pump made from rugged cast iron with a cast impeller. Impellers are dynamically balanced to improve efficiency and bearing life.Discharge can be vertical or horizonta...7.5HP 230/460v Learn More