Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Webtrol
Corrosion Resistant Pump
PC100R-3PH-T
$2,735.73- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel impeller insert & wear ring
1HP 208-230/460V TEFC Learn More -
Webtrol
Corrosion Resistant Pump
PC150R-3PH-T
$2,943.39- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
1 1/2HP 208-230/460V TEFC Learn More -
Hypro Pumps
316Stainless Steel pump 1HP
COMSV343T
$670.001HP 316 Stainless Steel investment cast end-suction centrifugal pump. Used in commercial applications from chillers to commercial cleaning machines and chemical transfer.
This series of low pressure general transfer pumps are also available in C...
230/460v/3 TEFC Learn More -
Serfilco
H2X1.5KE1V(M8)-D1.5
42-0318A
$3,389.39PVDF/KYNAR Centrifugal Horizontal Mechanical Sealed Pump 1.5 Hp Series “HE” Horizontal Pumps feature “total” chemical resistance with non-metalic construction of all wetted components. The molded, enclosed impellers are designed to provide maximu...1 1/2HP 208-230/460V TEFC Learn More -
American Stainless
SS horizontal pump with 1.5 hp motor.
S24325BET3
$671.00ASP American Stainless Pump. Pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. ...1 1/2HP 230/460V TEFC Learn More -
EBARA Pumps
Stainless Steel Pump 10 HP TEFC
A3U-40-160-1100T3G
$4,249.52The EBARA Stainless Steel 3U Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. NSF certified models available for drinking water. These pumps are guaranteed to...
10HP 230/460V TEFC Learn More -
RS Corcoran
Titanium Pump Centrifugal Chemical
3000 D (A10)
$13,944.00Industrial chemical pump made out of superior Titanium alloy. High efficiency impeller with mechanical seal.- Titanium construction completely
- End suction with ANSI 150LB Flanges
USCG Learn More -
Serfilco
HF3x2CM1L(M8)-D7.5
47-5011A
$5,337.16CPVC Centrifugal Horizontal Mechanical Sealed Pump 7.5 Hp Series “HE” Horizontal Pumps feature “total” chemical resistance with non-metalic construction of all wetted components. The molded, enclosed impellers are designed to provide maximum p...7 1/2HP 208-230/460V Learn More -
MP Pumps
Chemflo 6 316SS Centrifugal
33293
$6,570.00316SS Chemical pump by MP, ChemFlo 6
Made with high quality investment cast 316 stainless steel components, the ChemFlo® series of pumps are designed to be applied in a wide range of pumping applications where stainless steel is required. The Che...
15HP 230/460v Learn More -
AMT Pumps
SS Self PrimingPump
429A-98-3ph
$1,086.00Self Priming AMT 316 SS Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE) and are recommended for use with nonfl...230-460V 3phase 1/2HP TEFC Learn More
