Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
Webtrol
Corrosion Resistant Pump
PC150R-3PH
$2,593.53- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
1 1/2HP 208-230/460V ODP Learn More -
Webtrol
Corrosion Resistant Pump
PC50R-3PH-T
$2,349.74Corrosion resistant Centrifugal Pump.- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
1/2HP 208-230/460V TEFC Learn More -
Webtrol
Corrosion Resistant Pump
PC75R-3PH-T
$2,469.39- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
3/4HP 208-230/460V TEFC Learn More -
Webtrol
Corrosion Resistant Pump
PC100R-3PH-T
$2,735.73- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel impeller insert & wear ring
1HP 208-230/460V TEFC Learn More -
Webtrol
Corrosion Resistant Pump
PC150R-3PH-T
$2,943.39- Glass Reinforced Noryl
- Close coupled
- Ability to rotate the discharge in 90 degree increments.
- 316 stainless steel
1 1/2HP 208-230/460V TEFC Learn More -
Hypro Pumps
High Head Pump
CHMSV673
$1,571.48316 Stainless Steel High Head Centrifugal Pumps.Designed for continuous high-pressure circulation and transfer of non-flammable liquids, utility, boiler feed, general transfer, filtration, cooling towers, condensate return, marine applications...
SS,3HP,3ph Learn More -
AMT Pumps
Stainless Steel Centrifugal Pump
4901-98
$1,485.60The straight centrifugal pump is designed for continuous duty low pressure OEM, industrial/commercial and general service applications including circulation, chemical processing, liquid transfer, cooling, sprinkler/fire protection systems & pre...208-230/460v 3HP ODP Learn More -
AMT Pumps
Self Priming Pump Bronze
3894-97
$1,770.00AMT Self-Priming Bronze Centrifugal pumps are designed for a wide range of applications including chemical processes, waste water treatment and pumping agriculture fertilizers/fumigants. All models are equipped with TEFC (Totally Enclosed Fan C...230/460v 2HP Learn More -
AMT Pumps
Self Priming Bronze
3892-97
$1,582.00AMT Self-Priming Bronze Centrifugal pumps are designed for a wide range of applications including chemical processes, waste water treatment and pumping agriculture fertilizers/fumigants. All models are equipped with TEFC (Totally Enclosed Fan C...230/460v 3/4HP Learn More -
AMT Pumps
High Head SS Straight Centrifugal Pump
553B-98
$999.00High Head SS pump, 1.5HP 3-phase
The AMT line of Stainless Steel Straight Centrifugal pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circu...
1-1/2HP 230/460 Learn More
