Horizontal Pumps
Designed and meant to be used as a horizontally mounted assembly.
This includes feet on the pump, motor or both for securing the pump
and motor to its floor or structure. The most common type of
Horizontal pump is the End Suction, where the fluid enters the
front end of the casing and exits perpendicularly. The source of
liquid is either above the pump, in which case it is a positive
head and no special priming is needed. If the liquid source is
below the pump then either a priming chamber is needed or use of
some sort of suction side valve, i.e. foot valve, to maintain prime
in an open pumping system. If the inlet and outlet go into the same
tank, i.e. re-circulating or filtering, and the lines are kept
below the surface level, then after initial priming the system will
maintain its prime.The two big considerations that must be given to
horizontal pumps is priming method and NPSHa.Typical Centrifugal
Horizontal pumps include mechanically sealed, magnetic coupled
seal-less, self-priming, multistage, jet, back pullout, portable,
API and ANSI to name a few.
-
MP Pumps
Series 110 w/ motor
24994
$1,750.00Series 110 End Suction Centrifugal Pump. 1.5" NPT suction and 1.25" NPT vertical or horizontal discharge. Close-coupled Cast Iron Electric Motor-1.5 HP, 3450 RPM.1-1/2HP 230/460v Learn More -
MP Pumps
FM5 Pump 1.5HP 3P
35221
$1,847.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1.5 HP. FLOMAX® 5 self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights...
1.5HP 230/460v CI Learn More -
AMT Pumps
Sprinkler Booster Pump 1.5HP
379J-95
$1,020.00AMT Sprinkler/Booster pumps feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All models self-prime to 20 feet. Single stage models feature a built-in check valve to in...
230/460v TEFC Learn More -
MP Pumps
FM5 Pump w/1.5HP Motor
26297
$1,716.00Flomax 5 are self-priming pumps, pipe size 1.5" NPT. Electric Motor Driven Pump using a Close-Coupled Cast Iron Electric Motor-1.5 HP1.5hp 230/460v CI Learn More