My Cart

Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 11-20 of 61

Set Descending Direction
per page
  1. Berkeley Pumps

    B1-1/2ZPLS

    B54504

    $8,002.00
    Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.
    • All pumps offer back pull-out design
    • American Made
    • Berkeley Pump discharge size: 1-1/2"
    • Berkeley Pump suction size: 2"
    applications irrigation...
    15HP 230/460v Seal Learn More
  2. AMT Pumps

    Self Priming Dewatering Pump

    2766-95

    $1,179.00
    AMT Self-priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling ...
    3HP 230/460v Learn More
  3. Berkeley Pumps

    B1-1/2ZPH (15HP - Three Phase - CI)

    B53759

    $9,695.00
    Berkeley Pumps offers a variety of models with the pump attached directly to the motor frame.
    • All pumps offer back pull-out design
    • Impeller size is 9"
    • Berkeley Pump discharge size: 1-1/2"
    • Berkeley Pump suction size: 2"
    applications irrigation, ...
    15HP 230/460v packed Learn More
  4. AMT Pumps

    Stainless Steel self priming Centrifugal

    2763-98

    $2,106.00
    Stainless Steel self priming Centrifugal pumps is designed for Industrial and Commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable ...
    230/460v 2HP ODP Learn More
  5. Munro Pumps

    Irrigation pump 3hp

    MULP300B3

    $3,047.00

    Irrigation pump 3hp.

    Munro sprinkler pump. Residential self-priming pump. LP075B Easy service desing. Professional construction. Designed specifically for turf irrigation, this self-priming pump provides outstanding performance to horsepower rati...

    3HP 230/460v Learn More
  6. American Stainless

    S24362B3D3

    S24362B3D3

    $979.94
    Models SSP & SSPC pumps have a one-piece shell, capable of supporting the pump and motor weight in a vertically mounted position. The internal design also prevents any air from being trapped in the pump case when mounted vertically. These pumps...
    3HP 230/460V ODP Learn More
  7. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-7M

    $9,130.00

    Myers I2C, I2CI and I2CB Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head / pressure (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (...

    7.5HP ODP 230/460v Learn More
  8. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-5M

    $9,130.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  9. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-20M

    $10,210.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

  10. Myers Pumps

    Frame Mtd. 2 Stage w/ motor

    I2CIB-15M

    $9,510.00

    Myers I2C, I2CI and I2CS Two-Stage Centrifugal pumps are designed and built for rugged continuous duty service. These high head (to 400 feet) medium capacity (to 140 GPM) are available in standard fitted (I2C), iron & bronze fitted (I2CI) epoxy c...

View as List Grid

Items 11-20 of 61

Set Descending Direction
per page