Standard
STANDARD PUMP makes drum barrel and diaphragm pumps.
Complete line of chemically resistant BARREL / DRUM and Air Diaphragm pumps are used for the chemical transfer of acids, alkalies, DEF, combustible solvents and petroleum products along with food / dairy throughout industry. Applications for industry include, DEF by Benecor, chemical,CPI, waste water treatment, sanitary Food Processing, Cosmetics, Pharmaceutical, pulp and paper, plating. Replace lutz flux pumps. Motors in electric or air.
MADE IN THE USA. Atlanta, GA PumpBiz distributes the complete line of Drum Barrel pumps, electric transfer pump types. Need repair parts for your Standard drum pump, we have them.
-
Standard
PP Strainer
9011
$117.00Recommended when pumping dirty or contaminated chemicals where abrasive particles are present. Contructed of PP. Mesh size = 0.630 x 0.098. Inner dimension = 1.5" (38mm). Outer dimension = 2" (51mm). -
-
Standard
Drum pump-SS-72 & air motor - SP-A1
A1 SS-72
$1,451.0072" Drum Pump Motor and Pump Combination. Use on day tanks or other bulk storage containers. Drum Pump - compressed air motor, operating pressure = 90 psi ( 6.3 bar), Includes muffler and inlet ball valve , 1/8" ( 3mm) inlet connection. RPM= 7500... -
Standard
High Volume Drum Pump SS 39"
SP-7600-39
$1,234.00Stainless Steel Drum pump 55g
Notice: This model replaces SP-SS-39 Made in USAThe Standard SP-7600-39 Stainless Steel Drum Pump is designed for safe and efficient transfer of flammable and combustible liquids such as ethanol. Constructed fro...
Chemical drum pump only SS-39 Learn More -
Standard
Batch Control Sys. PVDF-39
BC-A1-PVDF-39
$5,323.00TECHNICAL DATA- Maximum temperateure - 175deg;F (80ï½°C)
- Suction dimension - 1.63" (41mm)
- Maximum viscosity - 300cps
- Maximum flow - 20 GPM (88 l/min)
- Discharge dimension - 1" (25.4 mm) hose barb or NPT thread
- Paddle wheel: PVDF & Ceramic...
-
Standard
Batch Control Sys. PP-27
BC-280-PP-27
$3,724.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimension - 1.63" (41mm)
- Maximum viscosity - 300 cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT threa...
-
Standard
Batch Control Sys. PP-47
BC-ENC-PP-47
$4,063.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimention - 1.63" (41mm)
- Maximum viscosity - 300cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT thre...
-
Standard
Batch Control Sys. PP-60
PP-BC-ENC-60
$3,220.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimention - 1.63" (41mm)
- Maximum viscosity - 300cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT thread
- Paddle...
-
Standard
Batch Control Sys. PP-72
PP-BC-ENC-72
$3,684.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimention - 1.63" (41mm)
- Maximum viscosity - 300cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT thre...
-
Standard
Batch Control Sys. PVDF-27
PVDF-BC-ENC-27
$3,248.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimention - 1.63" (41mm)
- Maximum viscosity - 300cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT thread
- Paddle...
