BC Batch Control Barrel Pump System

Standard Pump's Batch Control Systems barrel pump is engineered to control, measure and dispense any volume of chemical liquid from barrel, drums, IBCs, plating tanks and any large storage vessel. Batch control electronic flow meter fitted to electric drum pump. They can be used in any industry where batching, chemical packaging, proportioning or dilution is required to be accurate and efficient.

• Operation: Simply enter the desired volume of liquid with the directional arrows. Press ENTER and the Batch Control System engages the motor, dispenses the required volume, then stops the motor to complete the process.
• Ideally suited for: Chemical Packaging, Waste Water Treatment, Chemical Manufacturing, Plating, Semi-Conductor, Pharmaceutical, and Agriculture.
• Employ "Teach In" calibration or preset "K factors" for maximum accuracy (±0.5%). No more estimating or using floor scales to properly measure corrosive chemicals
• Operator does not come in contact with corrosive chemicals. No more barrel tilting with fork lifts, measurement with buckets or pails. Control transfer of highly corrosive liquids from your storage container to a mixing tank or process line.
• Save up to 7 preset volumes in the Automatic Batch memory or change each batch in the Manual Batch setting.
• Displays volume units in gallons, Imperial gallons, liters, milliliters or cubic meters.
• Displays flow rate in gallons, Imperial gallons, liters, milliliters or cubic meters per minute, second, or hour.
• Language can be displayed in English, German, French, Italian or Spanish, as desired.
• Batch Controller operates on 120V or 220V power 50-60Hz.
• Available with standard pump tube lengths of: 27"(685mm), 39"(1000mm), 47"(1200mm), 60"(1500mm), 72"(1800mm).
• Batch control motors are available in TEFC or ODP for any corrosive environment. Both 60 Hz and 50 Hz motors are available.
• Re-setable totalizers.
• System operates up to 25 GPM. Faster transfer and measurement of liquid increases productivity and lowers downtime.
• Quick connection: 1" hose barb or 1" NPT thread for ease in hose change or quick disconnect setup.
• FOR Barrel PUMPS ONLY SEE STANDARD PUMP's SERIES SP.