Bronze Centrifugal Pumps
Bronze Centrifugal Pumps, Close coupled . The impeller is attached
directly to the motor shaft, the seal is a top quality face type
mechanical seal. These pumps can handle small impurities in the
liquid and the discharge line may be throttled without the need for
a relief valve.
- Flow: 1-100 GPM (3 - 380 LPM)
- Pressure: 0-60 PSI (0-4.1 BAR)
- Performance: Flow drops to zero with maximum pressure output.
- Suction Lift (Water): Zero for straight centrifugal. 15 ft. with foot valve (4.6 meters) Self-priming models to 20 ft. (6.1 meters)
- Liquid Cleanliness and Viscostiy: Clean or contaminated. Cannot pump viscous liquids above 2000 SSU.
- Liquid Compatibility: Most common liquids.
- Noise: Extremely quiet.
- Power Required: Least amount to start and operate; maximum amount at wide open flow and zero pressure; power demand decreases with pressure increase.
- Discharge Line: May shut off for extended time periods.
- Bearing Lubrication Required: No
- Temperature: -40 degrees F. to 250 degrees F. ( -40 degrees C to 122 degrees C)
-
Oberdorfer Pumps
Bronze Close Coupled Centrifugal Pump
101MP-F57
$1,500.72Close coupled Bronze Centrifugal with motor.- All Bronze
- Marine Use
- Carbon Face Mechanical Pump Seal
- Explosion Proof Motors Available
- Will Handle Contaminated Liquids
- Extremely Quiet
- A Standard in the Marine Air Conditioning Industry
- Counter-Cloc...
