My Cart

MTH T31 Regenerative Turbine Pump 9gpm at 100psi

The MTH T31 Series close-coupled regenerative turbine pumps represent the most economical, high performance alternative for low flow (1 to 9 GPM) applications involving moderate to high pressures (heads to 300 feet). Also known as jockey pump. Used on many chillers.

Self Adjusting Impeller T31 impellers utilize balancing holes to promote hydraulic self-centering and to eliminate the need for external adjustment. The impeller exerts no thrust load on the bearings, thereby extending service life. Self-centering is equally effective whether mounted in the horizontal or vertical position.Mechanical Seals All bronze fitted pumps have Buna rubber, high temperature carbon and ceramic seats, while Stainless Steel pumps feature FKM rubber and ceramic seats. Optional seats and materials are available.

300 PSI Case Working Pressure Rigid stucture is designed for maximum casing strength.

Water Flinger A water flinger provides added protection to ball bearings in the event of seal leakage.

End Suction/Top Discharge T31 Seriec pumps are compact to allow installation in small areas. The discharge can be rotated to 90°, 180°, 270° positions to faciliate the most convient installation.

Simple Construction T31 Series pumps contain only three major componenets, allowing for easy service.

Best Efficiency New pump designs optimize efficiency for each size.

Non-Cavitating T31 Series pumps may be operated under adverse inlet conditions without audible or measurable cavitation.

Low NPSH New inlet design provides superpior fluid handling ability with low head inlet conditions.

100% Tested Every pump is fully tested to verify performance prior to shipment.

Volatile Fluid Handling The turbine impeller handles vapors up to 20% by volume, minimizing the possibility of vapor lock.

“Oâ€Ring Gaskets “Oâ€ring gaskets are used throughout the T31 Series pumps to assure positive sealing.

Standard Motors Close Coupled T31 pumps use standard “C†face single phase 60/50 hertz 115-230 volt motors with a keyed stainless steel shaft.burks aurora

For Cross Reference to Burks and Aurora click here

View as List Grid

4 Items

Set Descending Direction
per page
  1. MTH Pumps

    MTH Regenerative Turbine Pump 1HP

    T31BAB1010B

    $1,103.50
    MTH pumps. The T31 Series closed close-coupled regenerative turbine pumps represent the most economical, high performance alternative for low flow (1 to 9 GPM) applications involving moderate to high pressures (heads to 300 feet). T31 impellers u...
  2. MTH Pumps

    Regenerative Turbine Pump 1HP

    T31BAB103TB

    $1,215.34
    The T31 Series closed close-coupled regenerative turbine pumps represent the most economical, high performance alternative for low flow (1 to 9 GPM) applications involving moderate to high pressures (heads to 300 feet). T31 impellers utilize bala...
  3. MTH Pumps

    Regenerative Turbine Pump 1HP

    T31BSS1010V

    $1,764.11
    The T31 Series closed close-coupled regenerative turbine pumps represent the most economical, high performance alternative for low flow (1 to 9 GPM) applications involving moderate to high pressures (heads to 300 feet). T31 impellers utilize bala...
  4. MTH Pumps

    Regenerative Turbine Pump 1HP

    T31BSS103TV

    $1,891.46
    The T31 Series closed close-coupled regenerative turbine pumps represent the most economical, high performance alternative for low flow (1 to 9 GPM) applications involving moderate to high pressures (heads to 300 feet). T31 impellers utilize bala...
View as List Grid

4 Items

Set Descending Direction
per page