10 Magnetic Chemical pump

Magnetic chemical pump in the MARCH product line is the TE-10K-MD.It has capacities of 206 GPM and a maximum discharge pressure of 70 PSI or162 feet of head. It is of Kynar® plastic (PVDF) construction and isdesigned to handle strong halogen solutions and certain strong chromic orsulfuric acid solutions. Because the TE-10K-MD pump is manufactured of only one material, for some rather specific applications, the variations in bushings, thrust washer and static "O" rings are limited. The electric motor drive for the number 10 pump is a 10 HP, 3 phase, dual voltage, TEFC chemical duty motor. An explosion proof 15 HP is available on special order. To insure smooth operation with various specific gravities, the impeller magnet assembly may be trimmed to a minimum diameter of 5.250 inches. The trim curve family should be consulted for other trim sizes for total compatibility with solutions of 1.0 specific gravity or higher. The TE-1OK-MD pump uses a unique drive magnet system and extreme caution should be exercised in assembly to avoid damage to the pump or injury to the technician. The MARCH TE-10K-MD pump is innovative in design and application and can solve many difficult fluid handling problems. SERIES 10 PUMPS INCLUDE ONE MODEL:

TE-1OK-MD K = Carbon filled Kynar® FLOW AND HEAD

Flow rates range from 50 GPM minimum to 210 GPM maximum Feet of head range from 0' to 170' maximum. INLETS AND OUTLETS

3" MPT inlet X 2" MPT outlet. MOTORS

10 HP, 3450 rpm, 230/460 Volt, 3 phase, 60 Hz., TEFC motor. Explosion Proof motor available. MATERIALS OF CONSTRUCTION

Carbon filled Kynar®, ceramic, FKM®, carbon bushing.

APPLICATIONS

Transfer pump for many acid and caustic chemicals, waste water treatment plants, strong chromic or sulfuric acid solutions. Note: A pump application questionnaire must be completed and filed with MARCH Mfg. Engineering Department.