Drum Pump motors

FTI drum pump electric motor S1.

Lab drum (55g) pump with Ergonomic, lightweight design. For use with FTI EF series Drum pumps. Continuous duty brush type motor. Double insulated. 12 ft. (3.5 m) cord w/ plug, circuit breaker, & manual reset. RPM:...

M7X Explosion Proof Motor for FTI TTS drum pumps.

115v Hazardous Duty electric motor for Stainless Steel drum / barrel pumps, TT series by Finish Thompson. Specifically designed and approved for flammable liquids like acetone, MEK, lacquer thinne...

Variable Speed Drum Pump Motor m3V. Variable speed motor allows you to safely dispense with a barrel pump at a flow rate that is suitable for particular application. When transferring to small containers or topping off others, use the low speed to...

Drum barrel pump motor pneumatic

for use with Finish Thompson Inc. FTI drum pumps series EF. Drum pump motors are available as electric or air pneumatic motors. Most motors and drum pump tubes are interchangeable. Simply disconnect one from the o...

M5XV Explosion Proof Drum Pump Motor. Hazardous Duty Motor for Barrel Pump. Enclosure: Explosion proof Output: 680 Watt RPM: 0-12,000 Volt: 230 Hz: 50/60 Phase: 1 FLA: 4.4, Cord: 12 ft. (3.5m). Motor features zero voltage release.  Powerful 1,000 ...

FTI drum pump electric motor. Enclosure: TEFC Output: 1/2 hp RPM: 10,000 Volt: 115 Hz: 50/60 Phase: 1 FLA: 5.7 Cord: 12 ft. (3.5m) Box Dimensions: 18" x 9" x 12" (46 x 23 x 30 cm) Weight: 14 lbs

NOTE: When pumping flammables or combustibles, use ...

Drum pump motor.Enclosure: Drip-proof Output: 1/2 hp (OBS - SEE M3V / 106655) RPM: 10,000 Volt: 115 Hz: 50/60 Phase: 1 FLA: 5.6 Cord: 12 ft. (3.5m) Box Dimensions: 10" x 6" x 10"(25 x 15 x 25 cm) Weight: 8 lbs (3.6 kg) Certifications: CSA

NOTE: W...

Variable Speed Drum Pump Motor m3V. Variable speed motor allows you to safely dispense with a barrel pump at a flow rate that is suitable for particular application. When transferring to small containers or topping off others, use the low speed to...

FTI electric drum pump motor. New improved design

Enclosure: TEFC IP55 Output: 1000 Watt Input: 680w RPM: 12,000 Volt: 230 Hz: 50/60 Phase: 1, FLA: 4.2 Cord: 12 ft. (3.5m) Box Dimensions: 20" x 6" x 10"(51 x 15 x 25 cm) Weight: 15 lbs(6.8 kg)

NO...

230v Electric Drum pump motor by Finish Thompson. Ergonomic, lightweight design. For use with FTI EF series Drum pumps. Continuous duty. Double insulated. 12 ft. (3.5 m) cord w/ plug, circuit breaker, & manual reset. RPM: 8,000/14,000 two speed En...