Product was successfully added to your shopping cart.
These rugged, positive displacement, economy pumps are UL listed
and deliver flow rates up to 20GPM (76LPM). The FR700B Series pumps
are compatible with the following fluids: Diesel, Gasoline,
Kerosene, Mineral Spirits, Heptane, and Hexane. The FR700B pumps
are NOT compatible with the following fluids: Acetone, Ammonia,
Benzene, Bleach, Hydrochloric Acid, Ink and Toluene.
Explosion-proof UL listed 1/3HP motor (115VAC-60Hz) with sealed
Heavy-duty switch, thermal overload protection and junction
Carbon rotor vanes and ceramic/carbon seal reduce wear and
Integral check valve with pressure relief on outlet side
reduces pressure drop and improves vertical lift
Easy removable strainer
Automatic bypass valve
2" threaded base for tank openings
No foot valve required
UL/cUL, CSA listed
Maximum outlet pressure-- 20 PSI (1.52 BAR)
Maximum flow rate (1)-- 20 GPM (75.7 LPM)
Maximum recommended Viscosity of Pumped Fluid--Diesel
Maximum ambient operating temperature-- 150F (66C)
Minimum ambient operating temperature -15F (-26C)
Minimum Dry Vacuum-- 12 inches of mercury
Minimum Suction Lift-- 15 ft. for Diesel. For gasoline see
Lift of gasoline dependent on Reid's vapor pressure of the
gasoline and it's temperature. The lower the vapor pressure and
temperature, the higher the possible lift.
This rugged, positive displacement, Heavy Duty pump is UL listed. Explosion proof UL listed 1/3 HP motor (115 VAC-60Hz) with sealed bearings, Heavy Duty switch, thermal overload protection and junction box. Carbon vanes and ceramic/carbon seals re...