Submersible "Non-Clog" Pump 4"
-
Manufacturer:
-
Series :
-
Product Name:Submersible "Non-Clog" Pump 4"
-
Model Number:4BSE753DS
230v/3P 7.5HP Dbl Seal
Model Number
4BSE753DS
36% Off
Special Price
$4,799.00
Regular Price
$7,464.00
Barmesa 4BSE753DS
4" Submersible Sewage "Non-Clog" Pump with double seal. Heavy duty sewage ejector pump
with Inboard oil filled shaft seal. Uses include commercial sewage,
loading docks and other wastewater pits where a non-clog submersible pump is
needed with high flow. 4" Horizontal Discharge Solids Handling Pump
4" horizontal discharge handles up to 3" spherical solids. Motor
sizes from .9 to 100HP Open and enclosed impellers, some with
pump-out vanes on backside. Delta impellers available on some
models Volutes available in both standard-efficiency concentric and
high-efficiency scroll designs Capacities to 1265 gpm Heads to 258
ft.
- DISCHARGE 4" 125LB ANSI Flange.
- LIQUID TEMPERATURE 104° F (140° F) continuous.
- VOLUTE Cast iron ASTM A-48 class 30.
- MOTOR HOUSING Cast iron ASTM A-48 class 30.
- SEAL PLATE Cast iron ASTM A-48 class 30.
- IMPELLER Design: open, double vane.
- IMPELLER Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3.
- SHAFT 416 series stainless steel.
- O-RINGS Square shaped Buna-N.
- PAINT Air dry enamel, water based.
- SEAL Design:Double, mechanical, oil filled chamber.
- SEAL Material : Silicon carbide outboard, with stainless steel hardware.
- HARDWARE 300 series stainless steel.
- CORD ENTRY 25 ft of neoprene cord SJTOW 10/4, sealed against moisture.
- MOISTURE SENSOR Normally open included.
- TEMPERATURE SENSOR Normally closed included.
- BEARINGS Upper: ball, single row, oil lubricated, for radial load. Lower: ball, single row, oil lubricated, for radial and thrust load.
- MOTOR NEMA B, 60 Hz, 1750 RPM, oil filled, with overload protection in motor.
- PUMP OPERATION Manual, does not include level control. See Options
- OPTIONAL EQUIPMENT Additional cord and slide rail coupling (SRC-2).
| Model Number | 4BSE753DS |
|---|---|
| part number | 62170125 |
| Series | Barmesa Industrial Pumps |
| Max Flow (GPM.) | 700 |
| Max Flow GPH | 42000 |
| TDH Maximum (Ft) | 60 |
| TDH Maximum (PSI) | 26 |
| TDH BEP (FT.) | 30 |
| Horse Power (HP) | 7 1/2 |
| Horsepower (IE .5, 1, 1.5, 20) | 7.5 |
| Outlet Connection Type | Flange |
| Outlet (In.) | 4 |
| Wetted Materials | Cast Iron |
| Elastomers / O-ring | Buna-Nitrile |
| Voltage (V) | 208-230 |
| Voltage (Range) | 208-240 |
| Phase (Ø) | Three (3) |
| Motor Frequency | 60 |
| Motor Amps (A) | 23 |
| Motor | Hermetically Sealed |
| Speed (RPM.) | 1725 |
| Max Operating Temperature (F) | 104 |
| Max Particle Size (In) | 3.0000 |
| Viscosity | SAE 10 oil 88.00 cp 500.00 ssu |
| Mechanical Seal | OIL FILLED |
| Mechanical Seal Face | SiC |
| Mechanical Seal Type | Double |
| Impeller Size (IN.) | 7.75 |
| Approvals | CSA |
| Impeller Material | open, double vane. cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3. |
| Motor Locked Rotor Amps (A.) | 80 |
| Cord Size | 10/4 |
| Cord Length (Ft.) | 25 |
| Motor Insulation | F |
| Duty | Continuous |
| Country of Manufacture | Mexico |
| Weight (Lbs) | 309.000000 |
| Warranty (YRS.) | 1 |
| GPM Of Water At 30 Feet Of Head | 500 |
| GPM Of Water At 50 Feet Of Head | 200 |
>
Barmesa Pumps LLC started operations in 1953, manufacturing small self-primer pumps, jet pumps and end suction centrifugal pumps for the rural market.
During the 1970's, new additions were made to the line of products and we started manufacturing submersible solids handling pumps as well as grinder pumps.
Today after more than 60 years, we have manufacturing facilities & distribution centers across America, and an extensive distributor network. Our State of the Art manufacturing facilities have modern CNC machinery as well sophisticated design and test capabilities. Barmesa serves markets such as marine, commercial, municipal, wastewater, water, industrial, construction, utility, chemical, OEM, irrigation, dewatering flood control, fire protection, as well as many other applications.
Our privately held family business is committed to offer an extensive variety of products with the best quality standards and on-time deliveries. We are proud to say "Quality Pumps Since 1953".
During the 1970's, new additions were made to the line of products and we started manufacturing submersible solids handling pumps as well as grinder pumps.
Today after more than 60 years, we have manufacturing facilities & distribution centers across America, and an extensive distributor network. Our State of the Art manufacturing facilities have modern CNC machinery as well sophisticated design and test capabilities. Barmesa serves markets such as marine, commercial, municipal, wastewater, water, industrial, construction, utility, chemical, OEM, irrigation, dewatering flood control, fire protection, as well as many other applications.
Our privately held family business is committed to offer an extensive variety of products with the best quality standards and on-time deliveries. We are proud to say "Quality Pumps Since 1953".
You May Be Interested In
