10 gallon coolant pump tank 1/8 HP
-
Model Number:
X11-HR45A
-
Product Name:10 gallon coolant pump tank 1/8 HP
-
Manufacturer:
-
Series (15 Models):
Model Number
X11-HR45A
$1,138.26
Graymills X11-HR45A
Coolant pump tank and pump. Tanks are constructed from 18 gauge steel, with a single built in
baffle. Graymills pumps are typically found on OEM machine tool
equipment and are thus well suited for replacement or retrofit
machine tool pumping applications. These pumps can also be used on
other industrial applications requiring a vertical cast iron or
stainless pump.
HR Series pumps are widely used for circulating thin liquids, and abrasives. Impellers are open type. No bearings, packings, or seals below liquid level. HR Series pumps can be purchased as part of a pump and tank system with 5, 6, or 10 gallon capacities. Viscosities and discharge diameter vary with pump model and are listed below.
HR 15 Specifications: 1/15 HP, 3000 RPM, 3/8” O.D., slip-on vertical discharge. Maximum viscosity: 100 SSU.
HR 35 Specifications: 1/25 HP, 1500 RPM, ½” NPT horizontal discharge. Maximum viscosity: 150 SSU.
HR 45 Specifications: 1/8 HP, 1725 RPM, ½” NPT horizontal discharge. Maximum viscosity: 500 SSU. HR 45 pump is available as an Agitator style pump (See HRAG model).
The HR 35 and 45 pumps are available with a nickel-plated body and volute and a stainless steel shaft for special applications.
Note: Information about the flow curves: 1. HR45/49 water2. HR35 water3. HR45/49 100 SSU oil4. HR45/49 300 SSU oil5. HR15 water6. HR35 100 SSU oil
| Model Number | X11-HR45A |
|---|---|
| Series | 10 Gal. Graymills Coolant Tank System |
| Max Flow (GPM.) | 16 |
| Max Flow GPH | 960 |
| TDH Maximum (Ft) | 11 |
| TDH Maximum (PSI) | 5 |
| TDH BEP (FT.) | 9.000000 |
| Horsepower (IE .5, 1, 1.5, 20) | 0.1300 |
| Outlet Connection Type | FNPT |
| Outlet (In.) | 0.5 |
| Wetted Materials | Acetal-Delrin, Cast Iron, Steel |
| Voltage (V) | 115 |
| Voltage (Range) | 110-120 |
| Phase (Ø) | Single (1) |
| Motor | TENV |
| Motor Frame | 48/56C |
| Self Priming | Yes |
| Max Operating Temperature (F) | 180 |
| Viscosity | SAE 10 oil 88.00 cp 500.00 ssu |
| Shaft | Steel |
| Length (In.) | 8.000000 |
| Mechanical Seal | No |
| Coupling | Y |
| Other | suitable replacement for OEM pumps like Gusher Ruthman |
| Impeller Material | Celcon, semi-open |
| Cord Length (Ft.) | 0 |
| Duty | Continuous |
| Drain | No |
| Port Rotation | Yes |
| Weight (Lbs) | 65.000000 |
>
You May Be Interested In
