Search results for: 'horizontal centrifugal pump mtr 1624'
-
Graymills Pumps
10 gallon coolant tank system
11-SG2A
$1,355.70Tanks are constructed from 18 gauge steel, with a single built-in baffle and an 18 mesh screen bowl.The SG series are gear pumps specially designed for high pressure applications. These pumps are recommended for use with liquids that have some l...
-
Rhombus
Three Phase Duplex Control Panel
3221W511H
$2,409.00Three phase duplex pump control panel. SJE Rhombus Model 322 control panel is designed to alternately control two three phase pumps in industrial and commercial water and wastewater sewage systems. The alternating action equalizes pump wear. In...9-14A Learn More -
Pulsafeeder
Metering Pump 5 GPD/250 PSI
LPB2SA-PTC1
$848.16The Series E Plus offers manual control over stroke length andstroke rate.- 20 flow/pressure envelops
- 100:1 turn down ratio
- Auto-off-Manual selection switch with indicator lights
- Built in fuse
- Clear hinged cover over controls for water resistance...
-
PumpBiz
12v Battery Glass Mat (AGM)-105Ah
8A31DTM
$347.0012 volt deep cycle Maintenance Free marine battery for operating backup sump pump systems. 5/16 threaded combination stud with SS wing nut.<<ul> Maintenance-free Construction: eliminates the need to add water Spillproof, Valve Regulated desi... -
Whale
Heavy Duty Gusher Urchin
ND9210
$131.00Heavy duty Whale Gusher Urchin is a durable and reliable drum pump. Typical applications: Diesel Transfer, Vegi oil WVO, Biodiesel, Diesel Generators Oil sump out and general Drum applications. Also widely used as a pump primer like handi-pump or ...
Metal exterior Learn More -
Standard
Batch Control Sys. PP-27
BC-280-PP-27
$3,724.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimension - 1.63" (41mm)
- Maximum viscosity - 300 cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT threa...
-
Standard
Batch Control Sys. PP-47
BC-280-PP-47
$3,825.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimension - 1.63" (41mm)
- Maximum viscosity - 300 cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT threa...
-
Standard
Batch Control Sys. PP-72
BC-280-PP-72
$4,148.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimention - 1.63" (41mm)
- Maximum viscosity - 300cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT thread...
-
Standard
Batch Control Sys. PP-27
BC-ENC-PP-27
$3,964.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimention - 1.63" (41mm)
- Maximum viscosity - 300cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT thre...
-
Standard
Batch Control Sys. PP-47
BC-ENC-PP-47
$4,063.00TECHNICAL DATA- Maximum temperateure - 175ï½°F (80ï½°C)
- Suction dimention - 1.63" (41mm)
- Maximum viscosity - 300cps
- Maximum flow - 25 GPM (95 l/min)
- Maximum specific gravity - 1.89
- Discharge dimension - 1" (25.4 mm) hose barb or NPT thre...