N994 Gear Pump with motor
-
Model Number:
N994S15H-M95
-
Product Name:N994 Gear Pump with motor
-
Manufacturer:
-
Series (32 Models):
3/4HP 230/460v Bronze / FKM
Model Number
N994S15H-M95
$1,149.00
Oberdorfer N994S15H-M95
Gear Pump bronze with motor. Pump housings and gears are made of
top quality bronze; shafts are from stainless steel 303. Bearings
are designed of high performance carbon-graphite material selected
for wear resistance and long service life.
Gear pumps are positive displacement pumps. Each shaft revolution displaces a definite amount of l9iquid relatively unaffected by the back pressure in the discharge line. Shaft speed and flow are directly proportional. Recommended pressure limits are 100 psi for water and non-lubricants, 150 psi for oil and lubricants. Maximum shaft speed is 1750 rpm.
A relief valve is necessary in the system if the discharge line contains any throttling devices, such as a shut-off valve, a spray nozzle or other restrictive device. This will return the liquid to the suction side or to the tank.
Service life will be increase substantially if the liquid pumped is clean and has a lubricity value. These pumps have extremely close tolerances.
Model Number | N994S15H-M95 |
---|---|
part number | N994S15H-M95 |
Series | N Oberdorfer Gear Pumps Bronze |
Max Flow (GPM.) | 6 |
Max Flow GPH | 360 |
TDH Maximum (Ft) | 92 |
TDH Maximum (PSI) | 40 |
Horse Power (HP) | 3/4 |
Horsepower (IE .5, 1, 1.5, 20) | 0.7500 |
Inlet Connection Type | FNPT |
inlet size | Less than 1" |
Inlet (In.) | 0.5 |
Outlet Connection Type | FNPT |
Outlet (In.) | 0.5 |
Wetted Materials | 304SS, Bronze |
Elastomers / O-ring | FKM |
Voltage (V) | 230/460 |
Voltage (Range) | 220-240/460-480 |
Phase (Ø) | Three (3) |
Motor Frequency | 60-50 |
Motor | ODP |
Speed (RPM.) | 1140 |
Motor Frame | 56C |
Self Priming | Yes |
Suction Lift (FT.) | 20 |
Max Operating Temperature (F) | 180 |
Viscosity | Glycerine 880.00 cp 5000.00 ssu |
Shaft | 304SS |
Mechanical Seal | LIP SEAL |
Mechanical Seal Type | Single |
Coupling | Y |
Rotation | CW from shaft side of pump. Reversing will reverse the "in" and "out". First time start-up the pump should be "primed". |
Cord Length (Ft.) | 0 |
Drain | No |
Port Rotation | Yes |
Country of Manufacture | United States |
Weight (Lbs) | 8.000000 |
Warranty (YRS.) | 1 |
>