Self-Priming Pump
Self priming pumps are able to pull prime after loosing prime or in
some cases can run dry and initiate priming. Centrifugal pumps
which are called self-priming actually need to be primed the very
first time and then after should hold prime or start up again if
pump has retained its priming liquid in its volute. These pumps do
not prime from a dry condition.
The second type of Self Priming pump is a positive displacement one and can pull prime completely on its own from often a dry condition.
Self-priming pumps all have a common limit to how high they can lift or prime. This is often 25 feet maximum and with some pumps may take up to 5 minutes.
-
Oberdorfer Pumps
3/4" Bronze gear pump 3/4HP
N970H-M46
$1,597.703/4" Bronze rotary gear pump with relief valve and close coupled to a 3/4 HP 115v/1/60 1150 RPM TEFC motor. Shaft speed and flow are directly proportional. Motor HP needs to increase with a increase in pump pressure. The nature of a positive disp...
