Self-Priming Pump
Self priming pumps are able to pull prime after loosing prime or in
some cases can run dry and initiate priming. Centrifugal pumps
which are called self-priming actually need to be primed the very
first time and then after should hold prime or start up again if
pump has retained its priming liquid in its volute. These pumps do
not prime from a dry condition.
The second type of Self Priming pump is a positive displacement one and can pull prime completely on its own from often a dry condition.
Self-priming pumps all have a common limit to how high they can lift or prime. This is often 25 feet maximum and with some pumps may take up to 5 minutes.
-
Hypro Pumps
Bronze Gear pump
GMBN2VA33
$2,238.04Rotary Gear pump end. 303 SS fasteners, Ryton gears.Adjustable relief valve designed for internal pressure relief, can be ported for either internal or external discharge. Do not operate the relief valve for more than one minute.
Use for pres...
1/4" 1/3HP 230/460v Learn More