Gear Pumps
Gear pumps, or rotary gear pumps,
are positive displacement (or fixed displacement), meaning they pump a constant amount of fluid for each revolution. Hypro, Oberdorfer gear pumps come in Cast Iron,Stainless Gear pump and Bronze. These pumps are for thick / high viscousity to water like liquids.
Sizes of our gear pumps range from 1/4" - 2" in size and are available with electric motors or bearing pedestal mount for local drive units.
Gear pumps have limited self priming abilities and should not run dry or handle any abrasives. The electric motors come in single or three phase along with Explosion proof.
Used for pumping oils, soaps, fuel and chemicals. Gear pumps are capable of high pressure but at low flow rates. The size of the electric motor depends directly to the output pressure. Flow is generally steady and no pulsation.
-
Hypro Pumps
316SS Gear pump
GMSV4A4
$1,735.68316SS Rotary Gear pump with 1HP motor. 303 SS fasteners, Ryton gears. Stainless steel gear pump for aggressive chemicals.
Use for pressure spraying, circulation of lubricants, tank / drum filling. Will handle water like liquids to very thick. B...
1/2" 1HP 115/230v Learn More -
Hypro Pumps
316SS Gear pump
GMSV4A23
$1,735.68316SS Rotary Gear pump with 1HP motor. 303 SS fasteners, Ryton gears. Stainless steel gear pump for aggressive chemicals.
Use for pressure spraying, circulation of lubricants, tank / drum filling. Will handle water like liquids to very thick. B...
1/2HP, 3phase Learn More -
Hypro Pumps
Cast Iron Gear pump 3/8
GMCV3VA4
$1,114.00Rotary Cast Iron Gear pump 3/8". 303 SS fasteners, steel gears.
Adjustable relief valve designed for internal pressure relief, can be ported for either internal or external discharge. Do not operate the relief valve for more than one minute.
Use...
1HP 3/8" Learn More
