Gear Pumps
Gear pumps, or rotary gear pumps,
are positive displacement (or fixed displacement), meaning they pump a constant amount of fluid for each revolution. Hypro, Oberdorfer gear pumps come in Cast Iron,Stainless Gear pump and Bronze. These pumps are for thick / high viscousity to water like liquids.
Sizes of our gear pumps range from 1/4" - 2" in size and are available with electric motors or bearing pedestal mount for local drive units.
Gear pumps have limited self priming abilities and should not run dry or handle any abrasives. The electric motors come in single or three phase along with Explosion proof.
Used for pumping oils, soaps, fuel and chemicals. Gear pumps are capable of high pressure but at low flow rates. The size of the electric motor depends directly to the output pressure. Flow is generally steady and no pulsation.
-
Hypro Pumps
Bronze Gear pump 1/2 hp
GCBN33V
Call For PriceBronze Gear pump close coupled to a 1/2 hp Carbonator type motor. Bronze spur gears with 304 stainless steel shaft and carbon/graphite shaft supports. Standard pressure relief valves that can be ported internally or externallyand adjusted.She...
3/8" 115v This Pump is no longer available. Please call us for possible alternatives Learn More -
Hypro Pumps
Cast Iron Gear Pump 1/2"
GCCN33V
$999.00Cast Iron Gear pump close coupled to a 1/2 hp Carbonator type motor. Use with lubricating liquids only, not water based.115/230v 1/2HP Learn More -
Hypro Pumps
Cast Iron Motor Mounted with Relief Valve
GCCV33V
$1,003.00Cast Iron Gear pump close coupled to a 1/2 hp Carbonator type motor. Steel spur gears with steel shaft and CI shaft supports. Standard pressure relief valves that can be ported internally or externallyand adjusted.Shertech self-priming, posit...
1/2HP 115/230v Learn More
