Gear Pumps
Gear pumps, or rotary gear pumps,
are positive displacement (or fixed displacement), meaning they pump a constant amount of fluid for each revolution. Hypro, Oberdorfer gear pumps come in Cast Iron,Stainless Gear pump and Bronze. These pumps are for thick / high viscousity to water like liquids.
Sizes of our gear pumps range from 1/4" - 2" in size and are available with electric motors or bearing pedestal mount for local drive units.
Gear pumps have limited self priming abilities and should not run dry or handle any abrasives. The electric motors come in single or three phase along with Explosion proof.
Used for pumping oils, soaps, fuel and chemicals. Gear pumps are capable of high pressure but at low flow rates. The size of the electric motor depends directly to the output pressure. Flow is generally steady and no pulsation.
-
Oberdorfer Pumps
3/4" Bronze gear pump 3/4HP
N970H-M46
$1,597.703/4" Bronze rotary gear pump with relief valve and close coupled to a 3/4 HP 115v/1/60 1150 RPM TEFC motor. Shaft speed and flow are directly proportional. Motor HP needs to increase with a increase in pump pressure. The nature of a positive disp... -
Oberdorfer Pumps
Bronze Rotary Gear Pump w/ motor & relief valve
N990RH-M46
$2,748.20Oberdorfer Close coupled bronze rotary gear pumps.- Bronze Construction with SS shaft
- Helical gears for quiet operation
- Self-lubricating carbon bearings
- O-ring seal for max. leak protection
- The pump drive shaft is connected to the motor shaf...
-
Oberdorfer Pumps
Bronze gear pump
N993C-M26
$1,298.70Bronze gear pump. Pump housings and gears are made of top quality bronze; shafts are from stainless steel 303. Bearings are designed of high performance carbon-graphite material selected for wear resistance and long service life.Gear pumps are p...
3/4HP 115/230v Learn More
