Float / Level Switches

High Water Alarm Switch HWF. Works with WiFi module PS-WiFi. OPTIONAL High Water Accessory for activating WiFi module when the water has reach the high water sensor float. Simply connects by its 2 bell wires to NO / COM of PS-WiFi.  Allows for use...

Dual Float Level Switch Ultimate High Cycle Controller

Sump pump Switch with alarm and Pump HIGH CYCLE Protection!

Deluxe Dual Float Controller Ultimate and dual float switch. Dual float means dual protection from float switch failure. Industria...

• When water reaches the 360° water sensor, an audible alarm will sound on the connected device
• 360˚ water sensor is only ½" thick, making it perfect f...

Dual Float Controller DFC1 The Dual Float and Controller is included with the S2 series pumps. It turns on the pump when water lifts the float switch 1/4", and runs the pump for an additional 10 seconds after the float drops, to completely empty t...

Mechanically-activated switch designed for direct control of pumps up to 1 HP at 230 VAC. 15VM2WP

This mechanically-activated pump switch is designed to operate in non-potable water and sewage applications with limited...

HydroCheck HC8000 Hi-Lo Pump Switches are "electronic float" switches that are designed to work in sump pits. They are particularly useful when the sump pit is very large and may take more than 90 seconds to empty, or the water table is unusually ...

HydroCheck Hi-Lo Pump Switches are "electronic float" switches that are designed to work in sump pits. They are particularly useful when the sump pit is very large and may take more than 90 seconds to empty, or the water table is unusually high an...

STAK Sump Pump Switches are "electronic float" switches that are designed to work in sump pits that collect ground water from around the home's foundation. Unlike traditional float switches, the Sump Pump Switch has no moving parts that can seize ...