Coolant Pump
Coolant Pump OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron or stainless pump. Ideal for coolant and lubrication systems, parts cleaners. Sacemi pumps can be replaced with these.
IMS** models are dependable, economical replacements for suction pumps commonly supplied as original equipment on foreign manufactured machine tools. They should not be used to circulate fluids containing fine contaminants. For applications requiring the circulation of liquids containing large amounts of foreign matter, Graymills IMV Series centrifugal pumps are recommended.
pumps are interchangeable with comparable models of Fuji, Gusher, Haas, Mitsibishi, Toshiba, AMT, Hitachi & Yasukawa.
-
Graymills Pumps
17 gallon rectangular 3/4 HP
X17-TN33HF
$1,860.76Tanks are constructed of 16 gauge steel with one or two baffles depending on pump. Tank has a chip basket in lid which is removeable. Chip basket has a weir for collecting chips from the coolant stream. Graymills pumps are typically found on OEM ... -
Graymills Pumps
Vertical Parts Washer Pump
TN57E 3/4
$1,459.45Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron...3/4HP 115v/230v Learn More -
Graymills Pumps
17 gallon rectangular 3/4 HP
X17-TN33HE
$1,886.76Tanks are constructed of 16 gauge steel with one or two baffles depending on pump. Tank has a chip basket in lid which is removeable. Chip basket has a weir for collecting chips from the coolant stream. -
Graymills Pumps
55 gallon rectangular tank systems 3/4 HP
X55-TN56 F
$2,505.28Machine tool coolant pump & tank system.
Graymills 3/4HP 55g coolant tank systems are common on many OEM machine tools and as replacements to collect coolant fluid and strain out the chips and debris for re-use. Made in USA. Steel tanks are low p...
230/460v 3/4HP Learn More -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TN58E 3/4
$1,486.26Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron... -
Graymills Pumps
38 gallon rectangular tank system 3/4HP
X38-TN56F
$2,453.92These models offer a wide variety of pumps to handle high head/volume requirements. Tank is 16 gauge steel, with three baffles built-in. Chip basket is included.230/460v Learn More -
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
CSW313HF 3/4
$1,612.39Flange Mount pumps are designed to mount to the outer wall of integral machine sumps or tanks. All Flange Mount pumps have two horizontal discharge ports as standard to facilitate plumbing from either side, with a single internal port available a...
-
Graymills Pumps
Vertical CI Centrifugal Pump & Mtr
TNW524E 3/4
$2,006.95Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron... -
Graymills Pumps
Vertical CI Centrifugal Pump Parts washer
TN57F 3/4
$1,448.40Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a vertical cast iron...3/4HP 230/460v Learn More -
Graymills Pumps
Coolant pump
IMS75F 3/4
$896.38Coolant pump
Graymills pumps are typically found on OEM machine tool equipment and are thus well suited for replacement or retrofit machine tool pumping applications. These pumps can also be used on other industrial applications requiring a verti...