Boiler Feedwater Pump
Boiler feedwater pump is a specific type of pump used to pump
feedwater into a steam boiler. The water may be freshly supplied or
returning condensate produced as a result of the condensation of
the steam produced by the boiler. These pumps are normally high
pressure units that use suction from a condensate return system and
can be of the centrifugal pump type.
Quick rule of thumb is that 1/10 of a gallon is needed for every boiler horsepower. ASME code requires that you furnish feedwater to your boiler at 3% higher than what the relief valve setting is on the boiler.
-
Sta-Rite
JB Centrifugal Pump Med Head 1-1/2HP
JBMF-40S
This pump has a heavy-duty cast iron construction with silicon bronze impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable w...
-
Sta-Rite
J Centrifugal Pump High Head 3/4HP
JHD-62HL
Sta-Rite - JHD: J Centrifugal Pump High Head 3/4HP. This pump has a heavy-duty cast iron construction with Noryl impeller. Replace Myers CT07- Applications: Water systems and sprinkler booster for homes, farms and industry
- Drain Port: Provide...
3/4HP 115/230v Learn More -
Sta-Rite
J Centrifugal Pump High Head 1/2HP
JHC-61HL
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring an...
-
MTH Pumps
MTH Regenerative Turbine Pump 1/2HP
T31AAB0510B
$965.57MTH Pump. The T31 Series closed close-coupled regenerative turbine pumps represent the most economical, high performance alternative for low flow (1 to 9 GPM) applications involving moderate to high pressures (heads to 300 feet). T31 impellers ... -
MTH Pumps
MTH Turbine Pump 1/2HP
T41BBF051OB
$1,356.36MTH pumps. Mechanically sealled regenerative turbines for low flow high pressure applications. Serving a wide variety of markets and industries including boiler feed, condensate return, chillers / temperature controllers, refrigeration, petro... -
MTH Pumps
Regenerative Turbine Pump
T31FAB051OB
$939.80The T31 Series closed close-coupled regenerative turbine pumps represent the most economical, high performance alternative for low flow (1 to 9 GPM) applications involving moderate to high pressures (heads to 300 feet). T31 impellers utilize bala... -
Hypro Pumps
Turbine pump
TXMBB13T
$2,240.57Features • Direct Drive • Max. flow: 100 gpm • Max. pressure: 100 psi (Shut off) • Max. speed: 1000 rpm • Shaft: 15/16" stainless steel with 1/4" keyway • Port sizes: 1-1/2" NPT inlet, 1-1/2" NPT outlet • Max. fluid temperature: 140ºF • Housing: ...
-
Sta-Rite
J Centrifugal Pump High Head 1-1/2HP
JHF-51HL
Sta-Rite - JHF: J Centrifugal Pump High Head 1-1/2HP. This booster pump has a heavy-duty cast iron construction with Noryl impeller. Replace Myers CT15- Applications: Water systems and sprinkling for homes, farms, car wash and industry
- Drain ...
1-1/2HP 115/230v Learn More -
Sta-Rite
J Centrifugal Pump Med Head 1/2HP
JMC-56L
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
115/230v Learn More -
Sta-Rite
J Centrifugal Pump Med Head 1HP
JME-58L
This pump has a heavy-duty cast iron construction with Noryl impeller.- Applications: Water systems and sprinkling for homes, farms and industry
- Drain Port: Provided for easy winterizing
- Easy Serviceability: Includes replaceable wear ring and fea...
115/230v Learn More
