Vertical Pumps
Designed and meant to be used as a vertically mounted assembly.
Typical vertical pumps include or have as an option some sort of
mounting plate. Others are meant to be completely submersed in the
liquid. Vertical pumps can have either a relatively short shaft and
therefore be canti-levered from the motor allowing for them to
operate without bearings and to run-dry. Others have some sort of
bearings or bushings, usually a non-metallic type, somewhere along
the shaft to minimize shaft run-out and whip. This category also
includes those pumps, which are hermetically sealed pump and motor
units, suitable for being completely submersed in the liquid.
Unlike horizontals, vertical pumps rarely need to be primed, the
impeller and casing simply need to be submerged during start-up.
Here considerations are usually on the controlling of the pump
on-off cycles with some sort of float switch.
-
Tsurumi
Tsurumi Submersible Pump
HS2.4S-62-230
$335.00230v Tsurumi Submersible Sand Trash Pump. Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly by removing only 3 nuts. Used to dewater fl...
2" 180GPH 1/2HP 230v Learn More -
Barmesa Pumps
Submersible Non Clog Sewage Pump
2BSE52SS
$1,129.00Submersible NON-CLOG pump 120v, 2" spherical solids handling. 15 ft. cord. All cast iron. Heavy duty sewage Non-clog water pump. Single phase industrial motor, NEMA B, oil filled, with upper and lower ball bearings. Impeller Design: open, double v...
230v/1 1/2HP 2" Learn More -
Barnes Pumps
Effluent Pump Step-DS 240v
STEP522DS
$2,307.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handle... -
Munro Pumps
Puddle Pro Pump 1/2HP
FSR4001S22
$776.25FSR Dewatering Pump is especially designed for continuous duty with stable operating performance to carry dirty or clean water. Motor has ball bearings top & bottom. The FSR400 requires no priming, suction hose or foot valve. Simply submerge the ...230v Learn More -
Barnes Pumps
Non-clog pump, Sgl seal
3SE524L
$1,763.36Submersible non-clog sewage pump designed for typical raw sewage applications. -
Barnes Pumps
PFSTEP522 Effluent pump
PFSTEP522
$1,224.84Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane Effluent pump CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor hous... -
Barnes Pumps
105059 Effluent pump
EH522L
$1,953.72Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane Effluent pump CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor ho...1/2Hp Manual 230v/1 Learn More -
Barnes Pumps
Vortex Pump .5hp
2SEV522L
$2,165.68Barnes 2SEV submersible NON-CLOG pump, handles 2" spherical solids due to its unique vortex impeller design. All cast iron heavy duty design. Includes 15ft line cord.1/2HP ,230v Learn More -
Barnes Pumps
Effluent Pump man 240v
EH522HT
$2,357.64High Temperature Submersible effluent pump
designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handles 3/4" spherical solids. All hardware is SS. Motor h...
High Temp 1/2HP 230v/1 Learn More -
Barnes Pumps
Effluent Pump Step-SS-240v
STEP522SS
$1,911.00S.T.E.P. series are designed for use in pressure sewer systems. STEP Submersible effluent pump designed to efficiently handle septic tank effluent applications for the long term. Rugged Cast Iron construction. Multi-Vane CI Vortex impeller handle... -
Barnes Pumps
Submersible Non-Clog Sewage Pump
SE52
$1,533.31Barnes submersible non-clog sewage ejector pump is designed for typical raw sewage applications. Bolt on threaded discharge flange. NO FLOAT switch 104874- Handles 2" spherical solids
- Includes 15' Cord w/o plug
- Pump may NOT be operated DRY f...
230v/1 1/2HP Learn More -
Barnes Pumps
Sump Pump
SE521
$1,511.91Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 6.2 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump.096755 Learn More -
Barnes Pumps
Submersible High Temperature Sewage Pump
SE52HT
$2,137.86Barnes submersible non-clog sewage ejector high-temperature pump is designed for high temperature raw sewage applications.- Handles 2" spherical solids
- Includes 15' Cord w/o plug
-
Barnes Pumps
Submersible High Temperature Sewage Pump w/ float
SE52HTAU
$2,378.61Barnes submersible non-clog sewage ejector high-temperature pump is designed for high temperature raw sewage applications.- Handles 2" spherical solids
- Includes 15' Cord w/o plug
- Includes integral mechanical float switch
104880 Learn More -
Barnes Pumps
Submersible non-clog sewage pump
2SEV524DS
$2,183.87Barnes 2SEV-DS submersible non-clog sewage ejector pump isdesigned for typical raw sewage applications. This pumps is also used to pump trash. Often used in parking lots and at bay doors.- Double Seal
- Vortex (non-clog) Impeller
- Handles 2" sp...
104924 Learn More -
Barnes Pumps
Submersible non-clog sewage pump
2SEV522DS
$2,590.47Barnes 2SEV-DS submersible non-clog sewage ejector pump isdesigned for typical raw sewage applications. This pumps is also used to pump trash. Often used in parking lots and at bay doors.- Double Seal
- Vortex (non-clog) Impeller
- Handles 2" spheric...
-
Barnes Pumps
Submersible Non-Clog Sewage Pump w/ switch
SE52AU
$1,766.57Barnes submersible non-clog sewage ejector pump is designed for typical raw sewage applications. Discharge has bolt on threaded flange. Replaces SE52A- Handles 2" spherical solids
- Includes 15' Cord and plug
- Includes Piggy back plug mechanica...
230v/1 1/2HP Learn More -
Barnes Pumps
Sump Pump
SE521AU
$1,687.39Submersible NON-CLOG pump, 2" spherical solids handling. 15 ft. cord. FLA 6.2 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may enter the sump. -
Barnes Pumps
Sewage Pump
SEV521
$1,686.00Submersible NON-CLOG pump, 2" spherical solids handling. Does not include float switch. 15 ft. cord. FLA 6.2 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may ... -
Barnes Pumps
Sewage Pump
SEV521AU
$1,850.00Submersible NON-CLOG pump, 2" spherical solids handling. Does not include float switch. 15 ft. cord. FLA 6.2 All cast iron, including impeller. Some sort of course screen should be used on top of the sump if large amounts or large debris may ente... -
Barnes Pumps
Vortex pump .5hp
2SEV524L
$1,763.36Barnes 2SEV submersible NON-CLOG sewage vortex pump, handles 2" spherical solids due to its unique vortex impeller design. All cast iron heavy duty design. Includes 15ft line cord.1/2HP, 240V/1ph/1750 Learn More -
Sta-Rite
STEP PLUS Filtered Effluent Pump
20DOM05221+1-01
$1,046.00Sta-Rite High-Head Filtered Effluent Pump. ST.E.P. Plus™. Septic high head pump
- Superior draw-down capability to 4-1/2" vs. 13-1/2" on a standard NEMA 4"
- 25% Reduced AMP-draw
- Cooler and quieter operation - eliminates expensive "flow-inducer slee...
1/2HP 230v/1 Learn More
