Horizontal Pumps

Designed and meant to be used as a horizontally mounted assembly. This includes feet on the pump, motor or both for securing the pump and motor to its floor or structure. The most common type of Horizontal pump is the End Suction, where the fluid enters the front end of the casing and exits perpendicularly. The source of liquid is either above the pump, in which case it is a positive head and no special priming is needed. If the liquid source is below the pump then either a priming chamber is needed or use of some sort of suction side valve, i.e. foot valve, to maintain prime in an open pumping system. If the inlet and outlet go into the same tank, i.e. re-circulating or filtering, and the lines are kept below the surface level, then after initial priming the system will maintain its prime.The two big considerations that must be given to horizontal pumps is priming method and NPSHa.Typical Centrifugal Horizontal pumps include mechanically sealed, magnetic coupled seal-less, self-priming, multistage, jet, back pullout, portable, API and ANSI to name a few.
View as List Grid

Items 1-20 of 20

Set Descending Direction
per page
Page
  1. AMT Pumps

    1HP Centrifugal Pump

    489E-95

    $768.00

    AMT - 489E-95: 1HP Centrifugal Pump.

    Replaced by 5022-95

    1HP Cast Iron straight centrifugal pump is designed for continuous duty high pressure OEM, industrial / commercial and general service applications including circulation, chemical processi...

    115/230v 1HP TEFC Learn More
  2. AMT Pumps

    SS 1HP Pump

    370E-98

    $960.00
    Stainless Steel 1HP Pump. This pump is designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including beer keg washing, circulation, chemical processing, liquid transfer and cooling.
    • Type 6 mec...
    110-120/230v 1HP TEFC SS Learn More
  3. AMT Pumps

    Cast Iron 1hp Pump

    370E-95

    $672.00
    Cast Iron 1hp Pump Designed for continuous-duty low pressure OEM, Industrial / Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. single phase TEFC motor.

    See Curve E

    Serie...
    115/230v 1HP TEFC Learn More
  4. AMT Pumps

    MSV3 1 HP 5 stage pump

    MSV3-5-1P

    $1,221.00

    1HP Multistage Vertical booster pump, 5 stages. Commercial / industrial centrifugal pumps, (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installations include...

    1HP 115/230v Learn More
  5. AMT Pumps

    Centrifugal Pump

    489E-98

    $1,176.00

    Stainless Steel 1HP centrifugal pump.

    Replaced by 5022-98

    The straight centrifugal pump is designed for continuous duty low pressure OEM, industrial/commercial and general service applications including circulation, chemical processing, liquid t...

    115/230v 1HP TEFC Learn More
  6. AMT Pumps

    MSV1 1 HP 9 stage pump

    MSV1-9-1P

    $1,396.00
    Multistage Vertical booster pump. Commercial / industrial centrifugal pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installatio...
    115/208-230V Learn More
  7. AMT Pumps

    MSV1 1 HP 8 stage pump

    MSV1-8-1P

    $1,366.00
    Multistage Vertical booster pump. Commercial / industrial centrifugal pumps are non-self-priming (gravity feed) units designed to handle high-pressure low flow liquid transfer applications where no suction lift is required. Typical installatio...
    115/208-230V Learn More
  8. Webtrol

    Corrosion Resistant Pump

    PC100R-T

    $2,539.35
    • Glass Reinforced Noryl
    • Close coupled
    • Ability to rotate the discharge in 90 degree increments.
    • 316 stainless steel impeller insert & wear ring
    1HP 115/230V TEFC Learn More
  9. AMT Pumps

    High Volume SS Straight Centrifugal Pump

    5481-98

    $837.00

    High Volume 1HP Stainless Steel Straight Centrifugal pumps.

    AMT line of SS pumps is designed for continuous duty high flow and high pressure applications including chemical processing, liquid transfer, cooling, pressure boosting, circulating and ...

    1HP 115/230v TEFC Learn More
  10. Hypro Pumps

    Corrosion Resistant PolyPro Pump

    CHMPB34T

    $1,014.87
    Corrosion Resistant Polypropylene Centrifugal pumps. Close coupled to a NEMA 56J electric motor. Great for plating solutions, fume scrubbers, chillers, ponds, fountains and waste treatment, parts washers, chemical transfer, pools, spas, solvent r...
  11. AMT Pumps

    Sprinkler pump electric

    379A-95

    $913.00

    AMT Sprinkler Booster pumps, electric, feature Investment Cast 316 SS closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All models self-prime to 20 feet. Single stage models feature a built-in check ...

    1HP 115/230v TEFC Learn More
  12. EBARA Pumps

    Stainless Steel Centrifugal Pump

    ACDU120/110T1G

    $1,351.56

    The Stainless Steel Series Centrifugal Pumps are designed for dependability, performance and rugged continuous duty service under the most severe conditions. 

    ACDU Stainless Steel Series Centrifugal Pumps are NSF certified and designed for depend...

    1HP 115/230V TEFC Learn More
  13. AMT Pumps

    Cast Iron Centrifugal Pump

    369C-95

    $682.00
    the straight centrifugal pump is designed for continuous duty low pressure OEM, industrial/commercial and general service applications including circulation, chemical processing, liquid transfer and cooling. single phase TEFC motor. All models ...
    115/230v 1HP TEFC Learn More
  14. MTH Pumps

    Turbine Pump 1HP

    T51CAB101TB

    $2,649.75
    Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...
  15. MTH Pumps

    Turbine Pump 1HP

    T51CSS101TV

    $4,838.97
    Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...
  16. MTH Pumps

    Turbine Pump 1HP

    T51DSS101TV

    $4,838.97
    Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...
  17. MTH Pumps

    Turbine Pump 1HP

    T51DAB101TB

    $2,649.75
    Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...
  18. MTH Pumps

    Turbine Pump 1HP

    T51DAI101TB

    $2,534.86
    Mechanically sealled regenerative turbines for low flow highpressure applications. Serving a wide variety of markets and industries includingboiler feed, condensate return, chillers / temperature controllers, refrigeration,petroleum, as well as t...
  19. AMT Pumps

    Stainless Steel Centrifugal Pump for DEF Fluid

    369C-E8

    $944.64
    Diesel Exhaust Fluid DEF pump. This pump is designed for continuous-duty low pressure OEM, Industrial / Commercial and General Service applications including circulation, chemical processing, iquid transfer and cooling. Diesel Exhaust Fluid (DE...
    115/230v 1HP TEFC EPDM Learn More
  20. AMT Pumps

    Stainless Steel Centrifugal Pump

    369C-98

    $1,008.00
    This pump is designed for continuous-duty low pressure OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, brine solution discharge, liquid transfer and cooling.
    • Type 6 mechanical seal and o...
    115/230v 1HP TEFC Learn More
View as List Grid

Items 1-20 of 20

Set Descending Direction
per page
Page