Water booster pump Flux Boosting System
Series (6 Models):
Product Name:Water booster pump Flux Boosting System
Pedrollo Flux Boosting System or Booster Pump System starts and stops the water pump according to the user's water boosting needs. Automatic booster pump. The FLUX replaces the traditional pressure system of a tank, pressure switch, and float switch. Use to boost household water pressure or sprinkler system.
Great for rain harvesting systems. FBSMS07 17G40P-A
Therefore the system has the following advantages:
- Flow activated system*, excellent with city water line, well pump, above ground storage tank*
- Easy installation
- Reduced dimensions
- Constant Flow
- No pressure tank required
- Pump protection against running dry, with automatic reset
- No maintenance required
- Flux Inline Water Boosting Systems by Calpeda Pump include a water pump and an electronic controller which are used in residential applications when it is necessary to boost the city water pressure. They are easy to install, require no scheduled maintenance, do not need a pressure tank on most installations and include protection against running dry.
Operation: When a tap is opened and the water demand exceeds the minimum starting flow*. Flux starts the pump and keeps it running, delivering constant flow, even when the capacity request is low. Flux control stops the pump when the demand is below 0.5 GPM*. In case of a leak in the system (less than .5 GPM) the Flux Control will not start the pump avoiding useless power consumption. Ideal for average to large two story homes or long runs of plumbing. Five water outlets can be operated at the same time without substantially reducing performance. Replace scala 2
See images and product bulletins above.
|Series||Booster Pump System with FLUX pump controller|
|Max Flow (GPM.)||40|
|Max Flow GPH||2400|
|TDH Maximum (PSI)||70|
|Horse Power (HP)||3/4|
|Horsepower (IE .5, 1, 1.5, 20)||0.75|
|Inlet Connection Type||FNPT|
|Outlet Connection Type||FNPT|
|Elastomers / O-ring||Buna-Nitrile|
|Phase (Ø)||Single (1)|
|Max Operating Temperature (F)||120|
|Viscosity||Water 1.00 cp 31.00 ssu|
|Mechanical Seal Face||Carbon-ceramic|
|Mechanical Seal Type||Single|
|Other||See performance chart under IMAGE tab for flow and pressure boost values.
Be sure that the maximum flow of the water meter will not be exceeded or more than 5psi drop. It See chart. It is recommended for residential applications, 75 psi maximum discharge pressure in order to prevent damage to piping. If above use a pressure reducing valve.
|Impeller Material||Noryl plastic|
|Cord Length (Ft.)||8|
|Country of Manufacture||Italy|