Ultra Nataor System Duplex Alternator pump control
Series (28 Models):
Product Name:Ultra Nataor System Duplex Alternator pump control
Duplex pump alternator alarm system. Ultra Nator™ control and alarm system controls two alternating single phase 120V pumps in duplex pump applications. Plug and play design features a factory installed power cord, floats and two angled pump receptacles - no field wiring required. The NEMA 1 (indoors) rated enclosure features indicators for pump fail, high water, horn disable, pump run and power on. Touch pad buttons for alarm test, horn silence, manual pump run, test/reset and battery test function. Only ONE pump will operate at a time. If your pit water conditions could require both pumps to operate during a high water emergency then consider the 122 duplex panels. However you will need over size piping or duplex discharge piping to handle the excessive flow. 9V battery backup for alarm system. (Battery Not Included). (2) 10 foot SJE MicroMaster® Switches.
Sump pump duplex control provides alternating operation of two 120 volt pumps. Max 15 amps combined. Plug-in ready wiring makes installation easy! Simply plug the pumps into the provided receptacles. No hard wiring required.
|Series||122 Duplex Pump Systems Control Panel Single Phase|
|Phase (Ø)||Single (1)|
|Max Operating Temperature (F)||120|
|Other||For indoor use only. Level switches are low voltage and have a small plug at the end. Cords can be made longer.|
|Cord Length (Ft.)||9|
|Country of Manufacture||United States|