My Cart

Tsurumi Submersible Sand Trash Pump HS3.75S-61

1HP 115v
Model Number
HS3.75S
$699.00
Tsurumi_HS3.75s

Tsurumi Submersible Sand Trash Pump. Pump sand, solids and debris with minimal wear and clogging. Tsurumi original is their Built-in shaft mounted agitator suspends solids. Easy pump end disassembly by removing only 3 nuts. Used in Florida to dewater basements, yards, pond cleaning and other bodies of water with sand, electric dredge for ponds.

Handles algae and other debris up to 3/8″ x 1″ in size. 20Ft power cord. Specify voltage as 115 or 230v. Automatic modes have "Z" in model.

  • Built in shaft mounted AGITATOR for suspends solids
  • Urethane Semi Vortex Impeller maximum durably and maintaining pump performance.
  • Double Inside Mechanical Seal with SiC faces provides the longest operation life.
  • Oil Lifter provides lubrication of the seal faces.
  • V-Ring Seal Protector protects mechanical seal from abrasive particles
  • Continuous running low water level 3-1/2". 
  • See Residue kit for floor level pumping HS-RK under accessories.
  • Heavy duty electric motor
  • 2 Year warranty

Order float control if needed as accessory. DFC1.5

More Information
Model Number HS3.75S
Series HS Sand / Solids Submersible Trash Pump
Max Flow (GPM.) 60
Max Flow GPH 3600
TDH Maximum (Ft) 60
TDH Maximum (PSI) 26
Horse Power (HP) 1
Horsepower (IE .5, 1, 1.5, 20) 1.0000
Outlet Connection Type MNPT
Outlet (In.) 3
Wetted Materials 304SS, Epoxy coated
Elastomers / O-ring Urethane
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor Amps (A) 9.6
Motor Hermetically Sealed
Speed (RPM.) 3450
Max Operating Temperature (F) 180
Max Particle Size (In) .37
Viscosity Milk 3.20 cp 40.00 ssu
Length (In.) 13.000000
Mechanical Seal Face SiC
Mechanical Seal Type Double
Motor Bearings Ball
Other Max. Diameter (inch) : 12-1/2", Max. Height (inch): 15-1/4". Continuous Running Water Level (inch): 3 1/2. ETL Certified to UL CSA standards for submersible construction pumps. Double shielded, permanently lubricated, high-temp C3 with B-10 life of 60,000 hours. Min. generator size 1300 Watts. Starting current 37A.
Approvals ETL
Impeller Material Urethane coated steel, Semi Vortex
Cord Size 14-Mar
Cord Length (Ft.) 32
Motor Insulation B
Duty Continuous
Port Rotation Yes
Country of Manufacture Japan
Weight (Lbs) 36.000000
Warranty (YRS.) 2
GPM Of Water At 15 Feet Of Head 55
GPM Of Water At 25 Feet Of Head 50
GPM Of Water At 30 Feet Of Head 47
GPM Of Water At 40 Feet Of Head 35
GPM Of Water At 50 Feet Of Head 20
>
As a pioneer in the submersible pumps, Tsurumi Pump is contributing to the people all over the world by supplying the products that always support people’s lives such as submersible pumps for wastewater and construction, centrifugal pumps, vacuum pumps, and water treatment equipment, etc. and also by offering technologies that control and protect water.