Tsurumi Fountain pump Water Feature
Series (19 Models):
Product Name:Tsurumi Fountain pump Water Feature
1/2HP 115v float
Fountain pump, or submersible water feature. Semi-Vortex impeller and open inlet provide for many tough applictions from wastewater to fountains and water features. Tsurumi Submersible Pond Fountain Pumps. 4740GPH max. Automatic
- Watertight Cable Entrance with Anti-wicking block.
- Permanently lubricated sealed ball bearings rated B-10 60,000 hours.
- Built in motor protection
- Continuous duty air filled copper wound highly efficient motor.
- Corrosion Resistant Stainless Steel Motor Casing
- Dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces.
- Environment friendly white oil seal lubricant
- Solids handling semi-vortex impeller, no strainer OPEN inlet
- For pond or fountain pump sizing contact PumpBiz
- 20FT cord
- 230v model available at same price, specify
- 2 Year warranty
|Series||Waterfall Pond Fountain Pumps Tsurumi|
|Max Flow (GPM.)||79|
|Max Flow GPH||4740|
|TDH Maximum (Ft)||31|
|TDH Maximum (PSI)||13|
|Horse Power (HP)||1/2|
|Horsepower (IE .5, 1, 1.5, 20)||0.5400|
|Outlet Connection Type||FNPT|
|Wetted Materials||304SS, FRP|
|Elastomers / O-ring||Buna-Nitrile|
|Phase (Ø)||Single (1)|
|Max Operating Temperature (F)||140|
|Viscosity||Milk 3.20 cp 40.00 ssu|
|Mechanical Seal Face||SiC|
|Mechanical Seal Type||Double|
|Other||Total operating cost per / MO. @ BEP $46(based on $.10 per kW HR and 24 hours per day, 7 days per week operation) Automatic float switch|
|Impeller Material||FRP, Semi-vortex solids handling|
|Cord Length (Ft.)||20|
|Country of Manufacture||Japan|
As a pioneer in the submersible pumps, Tsurumi Pump is contributing to the people all over the world by supplying the products that always support people’s lives such as submersible pumps for wastewater and construction, centrifugal pumps, vacuum pumps, and water treatment equipment, etc. and also by offering technologies that control and protect water.