My Cart

TE-5.5-MD-HC chemical pump

1/3HP TEFC 115/230v Ryton
Model Number
585604
$1,451.06
TE-5.5-MD-HC chemical pump

Ryton Magnetic Drive chemical Pump, Highly Corrosive. 115V / 230V 525 watts. The magnetic drive pump design consists of a cylindrical drive magnet attached to the motor shaft which rotates around a chemically resistant plastic -Ryton separator housing. Inside this housing is a magnet completely encapsulated in chemical resistant plastic, and is fixed to the impeller. The impeller is free to rotate on a ceramic spindle supported at both ends. Thrust washers are utilized as wear bearings. The washers are held captive and do not revolve, to prevent wear on the shaft. Since this setup has a magnetic coupling, it eliminates leakage compared to pumps with conventional shaft seals.

While no pump should run dry, the TE5.5MDHC has a unique design which allows it limited dry run. See owners manual for details. designed for circulation of acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other special fluids, for use in environments such as hospitals, chemical companies, photo labs, dry cleaning plants, car washes, machine shops, laboratories, manufacturing plants and print shops.

  • 2850/3450 RPM
  • 115V: 5.6/5.0 amps
  • 230V: 2.8/2.5 amps
  • 340/525 Watts
More Information
Model Number 585604
Series MD-SC Mag drive Semi-Corrosive Chemical Pump
Max Flow (GPM.) 32
Max Flow GPH 1920
TDH Maximum (Ft) 42
TDH Maximum (PSI) 18
Horse Power (HP) 1/3
Horsepower (IE .5, 1, 1.5, 20) 0.3300
Watts 525.000000
Inlet Connection Type FNPT
inlet size 1"
Inlet (In.) 1
Outlet Connection Type MNPT
Outlet (In.) 0.75
Wetted Materials Ryton-PPS GF
Elastomers / O-ring Viton
Voltage (V) 115/230
Voltage (Range) 110-120/220-240
Phase (Ø) Single (1)
Motor Frequency 50/60
Motor TEFC
Speed (RPM.) 3450
Self Priming Yes
Max Operating Temperature (F) 180
Viscosity Milk 3.20 cp 40.00 ssu
Shaft Ceramic
Length (In.) 11.000000
Mechanical Seal No
Motor Bearings Ball
Other This pump can be used for a wide range of material handling. Capable of handling highly corrosive materials. Consult chemical resitance guide.(Not for use with gasoline, fuel oils, or straight chlorine!)
Split phase motor with overload, must be wired in field.
Pump Bearing Carbon
Impeller Material Ryton
Cord Length (Ft.) 0
Duty Continuous
Drain Yes
Port Rotation Yes
Country of Manufacture United States
Weight (Lbs) 27.000000
Warranty (YRS.) 1

Supporting Docs

Supporting Docs
pdf
(Size: 125.17 KB) Extension: pdf