Sump pump only Pro grade

Industrial grade sump pumps for the residential market. Energy Star sump pump 1/3hp.

Pro Series submersible pumps. Sump pump, submersible dewatering pump. Not all sump pumps are created equal! Optional Dual Float and controller DFC1 as shown in picture purchase separately. Runs the pump for an additional 10 seconds after float drops.

• High flow 2770GPH / 46 GPM @ 10FT comprable to others 1/2HP
• Continuous duty construction, sump, ponds, fountains
• Cast iron and cast aluminum housing with primed and double baked paint
• Permanent Split Capacitor PSC motor for high efficiency
• Stainless steel shaft
• Upper and lower sealed ball bearings
• Dual carbon ceramic seals protect motor
• No oil to leak, water cooled motor
• Dynamically balanced cast iron impeller
• Will fit in a 10" diameter sump
• Energy Efficient! Will save you an average of $67 per year*
• 10' cord length
• Optional Dual Float Controller patent pending. Others also available under options
• Energy efficient motor for being "green" and includes thermal protector. The ST1033 pumps 6.1 gallons per watt hour (G/Wh) used, which is 172% more efficient than the competitive average of 1/3 HP sump pumps.

Until now there have been three varieties of float switches: vertical, tethered and pressure. Unfortunately, all three of these switches are subject to various forms of failure. Now a float has been created with redundant switches to eliminate these problems. The Dual Float has, not one, but two floats mounted within a protective cage. Should one float fail to operate, the second float is available and ready to activate the pump. The protective cage prevents debris or other wires from interfering with movement of the floats. Dual Float Level Switch

*assumes $0.12 per kilowatt hour, average 1/3 HP pump at 9.5 amps, 5 minutes run time per hour This pump is a replacement for the discontinued S2016