My Cart

Submersible Sewage "Non-Clog" Pump

115v Manual, 2", switch optional
Model Number
2BSE411
$983.00
Barmesa 2BSE411 Submersible Sewage  Non-Clog Pump

Submersible Sewage "Non-Clog" Pump 2".

Heavy duty sewage ejector pump with Inboard oil filled shaft seal. Uses include residential sewage, loading docks and other pits where a non-clog submersible trash pump is needed with high flow.

Features:

  • DISCHARGE 2" NPT, female, vertical.
  • LIQUID TEMPERATURE 104° F (40° C) continuous.
  • VOLUTE Cast iron ASTM A-48 class 30.
  • MOTOR HOUSING Cast iron ASTM A-48 class 30.
  • SEAL PLATE Cast iron ASTM A-48 class 30.
  • IMPELLER Design: open, double vane.
  • IMPELLER Material: cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3.
  • SHAFT 416 series stainless steel.
  • O-RINGS Square shaped Buna-N.
  • PAINT Air dry enamel, water based.
  • SEAL Design: single, mechanical, oil filled chamber.
  • SEAL Material : silicon carbide, with stainless steel hardware.
  • HARDWARE 300 series stainless steel.
  • CORD ENTRY 20 ft of neoprene cord SJTOW 14/3, sealed against moisture.
  • BEARINGS Upper: ball, single row, oil lubricated, for radial load. Lower: ball, single row, oil lubricated, for radial and thrust load.
  • MOTOR NEMA L, single phase, permanent split capacitor, 115 & 230 volts, 60 Hz, 1750 RPM, oil filled, with overload protection in motor.
  • PUMP OPERATION Manual, does not include level control. See Options
  • OPTIONAL EQUIPMENT Additional cord and slide rail coupling (SRC-2).
More Information
Model Number 2BSE411
part number 62180401
Series Barmesa Industrial Pumps
Max Flow (GPM.) 128
Max Flow GPH 7680
TDH Maximum (Ft) 26
Horse Power (HP) 4/10
Horsepower (IE .5, 1, 1.5, 20) 0.4000
Outlet Connection Type FNPT
Outlet (In.) 2
Wetted Materials 316SS, Epoxy coated
Elastomers / O-ring Buna-Nitrile
Voltage (V) 115
Voltage (Range) 110-120
Phase (Ø) Single (1)
Motor Frequency 60
Motor Hermetically Sealed
Speed (RPM.) 1725
Self Priming Yes
Max Operating Temperature (F) 104
Max Particle Size (In) 2
Viscosity SAE 10 oil 88.00 cp 500.00 ssu
Mechanical Seal Face SiC
Mechanical Seal Type Single
Approvals CSA
Impeller Material open, double vane. cast iron ASTM A-48 class 30, dynamically balanced, ISO G6.3
Cord Length (Ft.) 20
Country of Manufacture Mexico
Weight (Lbs) 53.000000
Warranty (YRS.) 1
GPM Of Water At 15 Feet Of Head 70
>
Barmesa Pumps LLC started operations in 1953, manufacturing small self-primer pumps, jet pumps and end suction centrifugal pumps for the rural market.

During the 1970's, new additions were made to the line of products and we started manufacturing submersible solids handling pumps as well as grinder pumps.

Today after more than 60 years, we have manufacturing facilities & distribution centers across America, and an extensive distributor network. Our State of the Art manufacturing facilities have modern CNC machinery as well sophisticated design and test capabilities. Barmesa serves markets such as marine, commercial, municipal, wastewater, water, industrial, construction, utility, chemical, OEM, irrigation, dewatering flood control, fire protection, as well as many other applications.

Our privately held family business is committed to offer an extensive variety of products with the best quality standards and on-time deliveries. We are proud to say "Quality Pumps Since 1953".